302 Stainless Steel: Properties and 302 vs 304 Differences

302 Stainless Steel

302 stainless steel is an 18-8 chromium-nickel austenitic stainless steel. It is designed for good corrosion resistance, high ductility, strong cold-working response and reliable mechanical performance. It is commonly specified as UNS S30200, AISI 302, SUS302 and BS 302S25.

Compared with 301 stainless steel, 302 stainless steel usually provides better corrosion resistance and less aggressive work hardening. Compared with 304 stainless steel, 302 has a higher maximum carbon level and is often selected for wire, spring, fastener, washer and cold-worked mechanical parts.

Compared with 303 stainless steel, 302 stainless steel has better corrosion resistance and better forming behavior, while 303 is easier to machine. Compared with 316L stainless steel, 302 is more economical for mild environments, but 316L is the better choice for chloride-rich, marine-adjacent or chemical service.

XRTGSteel supplies 302 stainless steel in sheet, plate, coil, strip, precision strip, spring strip, foil, wire, wire rod, round bar, flat bar and custom-cut products. We also provide cut-to-length, slitting, precision shearing, laser cutting, waterjet cutting, surface finishing, polishing, brushing, edge trimming, wire processing, forming support, machining support and export-grade packing.

What Is 302 Stainless Steel?

Basic Grade Definition

302 stainless steel is a chromium-nickel austenitic stainless steel in the classic 18-8 stainless steel family. It is similar to 304 stainless steel, but it has a higher maximum carbon allowance. This makes 302 useful for cold-worked parts that need strength, ductility and stainless corrosion resistance.

Main Performance Advantage

The main advantage of 302 stainless steel is its balance of ductility, corrosion resistance and cold-worked strength. It can be cold rolled, cold drawn and cold formed to improve strength. This makes it useful for springs, wire products, clips, clamps, washers, fasteners, mesh, screens and precision stamped components.

Technical Reference

ASTM A240/A240M is a common standard for stainless steel plate, sheet and strip. You can review the standard scope on the ASTM A240/A240M standard page. Final purchasing should still follow the required ASTM, AMS, EN, JIS, GB, wire standard or customer drawing.

Standards & Equivalent Grades of 302 Stainless Steel

International Grade References

302 stainless steel is supplied under several international references. Equivalent grades can vary by product form, chemical limit, cold-worked temper, tensile range and surface finish. The final order should confirm the UNS number, product standard, temper, tensile range and mill test certificate.

Country / RegionStandardGrade / Designation
InternationalUNSS30200
USAAISI / SAE302
USAASTM A240 / A276 / A313 / A580 / A666Type 302 / S30200, depending on product form
Europe / DINEN 10088 / Common Reference1.4319 / X5CrNi17-7, commonly referenced
JapanJIS G 4303 / 4304 / 4305SUS302
ChinaGB Reference12Cr18Ni9 / 1Cr18Ni9, depending on specification
United KingdomBS Reference302S25
Common Market NameCommercial NameSS 302 / 302 Stainless Steel / 18-8 Stainless Steel

Ordering Note

For spring wire, fastener wire, precision strip, stamped parts, washers or cold-headed parts, the grade name alone is not enough. Confirm the standard, temper, tensile range, wire diameter, strip thickness, edge condition, surface finish, packaging method and MTC before production.

More stainless steel materials are listed in our stainless steel grades overview. You can compare 302 stainless steel with 301, 303, 304, 304L, 316L and 17-7PH there.

Chemical Composition of 302 Stainless Steel

Main Alloy Design

302 stainless steel uses chromium-nickel austenitic chemistry. Chromium supports stainless corrosion resistance. Nickel stabilizes the austenitic structure and supports ductility, toughness and formability. Carbon supports higher strength potential in cold-worked products.

ElementTypical ContentMain Function
C≤ 0.15%Supports strength potential, but requires attention in welding and sensitization-sensitive service.
Cr17.00 – 19.00%Provides stainless corrosion resistance and surface passivation.
Ni8.00 – 10.00%Supports austenite stability, ductility, toughness and forming performance.
Mn≤ 2.00%Supports steelmaking control and austenite stability.
Si≤ 0.75 – 1.00%, depending on standardSupports deoxidation and steelmaking control.
N≤ 0.10%Controlled residual or strengthening element, depending on specification.
P≤ 0.045%Controlled residual element.
S≤ 0.030%Controlled for formability, weldability and surface quality.
FeBalanceMain base metal.

Composition Check Before Order

Chemical limits can change by standard and product form. Final acceptance should follow the purchase standard and MTC. For wire, spring strip, fasteners and precision stamped parts, tensile range, hardness, cold work level and surface quality should also be reviewed.

Mechanical Properties of 302 Stainless Steel

Annealed and Cold-Worked Products

302 stainless steel is commonly supplied in annealed, cold rolled, cold drawn and cold-worked tempers. Actual properties depend on product form, thickness, wire diameter, cold reduction, annealing condition and testing direction. Cold working can greatly increase strength.

Condition / Product FormTensile StrengthYield StrengthElongationHardness
Annealed sheet / plate≥ 515 MPa typical minimum≥ 205 MPa typical minimum≥ 40% typical minimum≤ 201 HBW typical maximum
Annealed coil / strip515 – 760 MPa typical205 – 350 MPa typical35 – 55% typicalDepends on thickness and finish
Cold-worked strip850 – 1500+ MPa typical500 – 1200+ MPa typical2 – 25% typicalDepends on temper and cold reduction
Spring wire / cold-drawn wire1000 – 2000+ MPa typicalDepends on wire diameter and reductionDepends on wire specificationDepends on final wire condition
Round bar / flat bar, annealed515 – 800 MPa typical205 – 450 MPa typical30 – 45% typicalDepends on size and processing condition

Mechanical Property Note

302 stainless steel is not hardened by quenching like martensitic stainless steel. It is mainly strengthened by cold working. Annealing can restore ductility, reduce hardness and improve forming performance after heavy cold work.

Physical Properties of 302 Stainless Steel

Typical Physical Data

The physical properties of 302 stainless steel are typical for chromium-nickel austenitic stainless steels. It has good toughness and useful forming behavior. It is generally non-magnetic in annealed condition, but cold working can create magnetic response.

PropertyTypical Value
DensityAbout 7.90 – 8.03 g/cm³
Melting RangeAbout 1390 – 1420°C
Elastic ModulusAbout 190 – 200 GPa
Thermal ConductivityAbout 15 – 17 W/m·K around room temperature to 100°C
Electrical ResistivityAbout 0.72 μΩ·m typical
Thermal ExpansionSimilar to many austenitic stainless steels
MagnetismGenerally non-magnetic when annealed, but may become magnetic after cold working

Practical Service Note

Physical data should not be used alone for material selection. Cold-worked condition, magnetic response, corrosion exposure, forming severity, spring design and surface finish should be reviewed together.

Key Features of 302 Stainless Steel

Performance Highlights

302 stainless steel is selected when a part needs good ductility, stainless corrosion resistance and high strength after cold working. It is especially useful for springs, wire, fasteners, washers, screens, clips, brackets and precision stamped parts.

Classic 18-8 Grade

302 is a chromium-nickel austenitic stainless steel with good corrosion resistance and ductility.

Strong Cold Work Response

Cold rolling and cold drawing can increase strength for springs, wire and fastener parts.

Good Formability

Annealed 302 can be stamped, drawn, formed and shaped for precision components.

Summary of Advantages

  • Austenitic 18-8 chromium-nickel stainless steel.
  • Good corrosion resistance in mild atmospheric, indoor and general industrial environments.
  • Good ductility and formability in annealed condition.
  • Strong cold-working response for wire, spring, strip and fastener applications.
  • Good toughness at low and cryogenic temperatures.
  • Better corrosion resistance than 301 in many mild environments.
  • Can become magnetic after cold working because of deformation-induced martensite.
  • Less suitable than 304L or 316L for severe welding, chloride-rich or marine service.

Corrosion Resistance, Weldability and Fabrication

Corrosion Resistance

302 stainless steel has good corrosion resistance in mild atmospheric, indoor, fresh water and many general service environments. It performs better than 301 in many mild environments. It is not recommended for severe chloride-rich, marine or aggressive chemical service.

Weldability

302 stainless steel can be welded with common austenitic stainless welding methods. For heavy welding, corrosive service or sensitization-sensitive applications, low-carbon grades such as 304L or 316L may be preferred. Proper cleaning and post-weld surface treatment help maintain corrosion resistance.

Cold Working and Machining

302 stainless steel can be cold drawn, cold rolled and cold formed to increase strength. Machining is fair to good, but work hardening must be controlled. Use rigid setup, sharp tooling, positive feed and suitable coolant during drilling, turning, cutting or forming.

Performance Item302 Stainless Steel Characteristics
Cold WorkingGood. Cold drawing and cold rolling can increase strength for wire, spring, strip and fastener applications.
General Corrosion ResistanceGood in mild atmospheric, indoor, fresh water and general service environments.
Chloride ResistanceLower than 316L. Not recommended for marine or chloride-rich service.
FormabilityGood in annealed condition. Cold-worked tempers require controlled bend radius and springback control.
WeldabilityGood with common austenitic stainless welding methods. Low-carbon grades may be preferred for heavy welding.
MachinabilityFair to good. Use sharp tooling and positive feed to control work hardening.
Heat TreatmentNot hardenable by quenching. Annealing is used to restore ductility after cold working.
Surface FinishGood bright, polished, brushed and precision strip finishes can be achieved.

For higher spring strength and stronger work hardening, choose 301 stainless steel. For easier welding and general fabrication, choose 304 stainless steel or 304L stainless steel. For chloride corrosion resistance, choose 316L stainless steel. For machining-intensive parts, review 303 stainless steel.

Typical Applications of 302 Stainless Steel

Springs, Wire and Cold-Worked Parts

302 stainless steel is widely used for spring wire, mechanical springs, clips, clamps, retaining rings and elastic components. It is useful when the part needs stainless corrosion resistance and strength from cold drawing or cold rolling.

Fasteners, Washers and Precision Stampings

Fastener and stamping manufacturers use 302 stainless steel for screws, bolts, nuts, rivets, washers, shims, spacers, brackets, pins and precision stamped parts. It gives a practical balance of ductility, forming behavior and cold-worked strength.

Wire Mesh, Screens and General Components

302 stainless steel is also used for wire mesh, woven wire, filtration screens, conveyor belts, food-service parts, appliance parts, electronic components and general industrial hardware. Final selection should consider tensile range, surface finish, corrosion exposure and magnetic response.

  • Springs, spring wire, mechanical springs, clips, clamps and retaining rings.
  • Washers, shims, spacers, brackets, pins and precision stamped components.
  • Fasteners, screws, bolts, nuts, rivets and cold-headed parts.
  • Wire mesh, woven wire, screens, conveyor belts and filtration components.
  • Kitchen equipment, food-service parts, appliance components and household hardware.
  • Electronic components, terminals, contacts, shielding parts and precision elastic parts.
  • Automotive trim, mechanical hardware, structural clips and formed stainless parts.
  • Medical and dental instruments where applicable standards and corrosion conditions allow.

302 Stainless Steel vs 301, 303, 304, 304L and 316L

Quick Comparison

Buyers often compare 302 stainless steel with 301, 303, 304, 304L and 316L. These grades are used in austenitic sheet, strip, wire, spring, fastener, forming, machining and general fabrication applications. The final choice should follow the application, corrosion exposure and processing route.

GradeSteel TypeMain AdvantageTypical Use
30218-8 austenitic stainless steelGood ductility, corrosion resistance and cold-working performance.Springs, wire, fasteners, washers, mesh and formed parts.
301Metastable austenitic stainless steelExcellent work hardening and high spring strength.Spring strip, clips, clamps and high-strength formed parts.
303Free-machining austenitic stainless steelExcellent machinability and chip breaking.Turned fittings, screws, shafts, bushings and machined parts.
304General-purpose austenitic stainless steelBetter all-round fabrication and corrosion balance.Food equipment, tanks, kitchen equipment and general fabrication.
304LLow-carbon austenitic stainless steelBetter resistance to sensitization after welding.Welded tanks, vessels, piping, structures and food equipment.
316LMolybdenum-bearing low-carbon austenitic stainless steelBetter chloride corrosion resistance.Marine-adjacent, chemical, pharmaceutical and hygienic equipment.

Selection Guidance

  • Choose 302 stainless steel when good corrosion resistance, ductility and cold-worked strength are required.
  • Choose 301 when maximum spring strength and stronger work hardening are more important.
  • Choose 303 when machining speed and chip breaking are the main priorities.
  • Choose 304 when broad general fabrication and common stainless availability are required.
  • Choose 304L when welding and sensitization resistance are important.
  • Choose 316L when chloride corrosion resistance, marine-adjacent performance or chemical resistance is required.

302 Stainless Steel Product Forms

Sheet, Plate, Coil, Strip and Foil

XRTGSteel supplies 302 stainless steel sheet, plate, coil, strip, precision strip, spring strip and foil for springs, washers, clips, fasteners, appliance parts, screens and precision stamped components. These products can be slit, leveled, sheared, polished, brushed, cut or protected with film according to the order.

Product FormAvailable OptionsTypical Use
302 Sheet / PlateCold-rolled sheet, hot-rolled plate, 2B sheet, BA sheet, polished sheet and custom blanks.Washers, brackets, formed parts, appliance parts and general fabrication.
302 CoilNo.1, 2B, BA, pickled, slit edge, mill edge and custom coil weight.Cut-to-length processing, strip production, stamping and roll forming.
302 Strip / FoilPrecision strip, narrow strip, spring strip, foil, bright strip and custom tolerance strip.Springs, washers, clips, shims, retaining rings and precision stamped parts.

Wire, Bar and Custom Parts

302 stainless steel wire and bar products are used for springs, wire mesh, fasteners, pins, terminals, mechanical hardware and custom machined parts. They can be supplied in standard sizes or processed into custom-cut components.

Product FormAvailable OptionsTypical Use
302 Wire / Wire RodWire, spring wire, cold-drawn wire, wire rod, cut wire, straight lengths and custom coils.Springs, wire mesh, fasteners, screens, terminals and elastic parts.
302 Flat / Round BarFlat bar, round bar, cut bar, ground bar, polished bar and custom lengths.Fasteners, pins, fittings, shafts, brackets and mechanical parts.
302 Custom PartsLaser-cut blanks, stamped blanks, formed parts, wire parts and semi-finished components.Springs, electronics, appliances, automotive, medical and industrial applications.

Processing and Testing Support

Processing Services

XRTGSteel can process 302 stainless steel before shipment. This helps buyers save fabrication time and control production cost. Available services include cut-to-length, slitting, precision shearing, laser cutting, waterjet cutting, surface finishing, edge trimming, wire processing, forming support and export packing.

ServiceWhat We Provide
Cut-to-LengthCut coil or strip into sheets, blanks or precision lengths.
SlittingSlit coil into narrow strip for springs, washers, clips and precision stamped parts.
Precision ShearingPrepare tight-tolerance strip, foil, sheets and blanks for precision fabrication.
Surface FinishingSupply No.1, 2B, BA, pickled, bright, polished, brushed, ground and custom precision finishes.
Laser CuttingPrepare sheet, strip, plate blanks, brackets and custom precision components.
Waterjet / Saw CuttingCut thicker plate, bar, wire and custom blanks when required.
Wire ProcessingSupport wire drawing, straightening, cut wire preparation, spring wire packing and custom wire coils.
Machining SupportSupport CNC turning, milling, drilling, grinding, polishing and semi-finished component preparation.
Testing SupportCoordinate hardness testing, tensile testing, bend testing, PMI, dimensional inspection and third-party inspection.
Export PackingUse waterproof paper, PVC film, coil eye protection, wooden pallet, wooden case and seaworthy export packing.

Inspection Support

For project orders, we can coordinate PMI, chemical analysis, tensile testing, hardness testing, bend testing, dimensional inspection, surface inspection, wire tensile testing and third-party inspection. We can also supply MTC documents, packing records and inspection reports.

How to Order 302 Stainless Steel from XRTGSteel

Information Needed for Quotation

A clear inquiry helps us quote faster. Please send the grade, product form, size, quantity, surface finish and delivery destination. For 302 stainless steel, temper, tensile range, wire diameter, strip tolerance and surface condition are especially important.

  • Grade: 302 stainless steel, UNS S30200, AISI 302, SUS302, 302S25 or project-specified equivalent.
  • Product form: sheet, plate, coil, strip, precision strip, spring strip, foil, wire, wire rod, round bar, flat bar or custom blank.
  • Size: thickness, width, length, wire diameter, bar size, strip tolerance, coil weight or blank dimension.
  • Condition: annealed, cold rolled, cold drawn, 1/4 hard, 1/2 hard, full hard, spring temper or custom tensile range.
  • Surface finish: No.1, 2B, BA, pickled, bright, polished, brushed, ground or custom precision finish.
  • Processing: slitting, cut-to-length, precision shearing, laser cutting, waterjet cutting, edge trimming, wire cutting or polishing.
  • Service condition: spring load, fatigue load, corrosion exposure, temperature, magnetic response requirement and forming route.
  • Testing requirement: MTC, PMI, tensile test, hardness test, bend test, dimensional report, surface report or third-party inspection.
  • Quantity: sheets, pieces, kilograms, tons, coil weight, strip coils, foil rolls, bar bundles or wire coils.
  • Delivery term: FOB, CFR, CIF, DDP or other agreed Incoterms.

Material Selection Support

If the best grade or temper is not clear, send your drawing, required tensile range, spring load, forming process, corrosion exposure and surface finish. Our team can compare 302 stainless steel with 301, 303, 304, 304L, 316L and 17-7PH. This helps you choose a safer material before ordering.

FAQ – 302 Stainless Steel

Q1: What is 302 stainless steel?

302 stainless steel is an austenitic chromium-nickel stainless steel in the 18-8 family. It offers good corrosion resistance, high ductility, good cold-working response and reliable performance for springs, wire, fasteners, washers, formed parts and general stainless components.

Q2: What is the UNS number of 302 stainless steel?

The common UNS number for 302 stainless steel is S30200. It is also commonly associated with AISI 302, JIS SUS302, BS 302S25 and EN 1.4319 as a market reference.

Q3: What is the difference between 302 and 304 stainless steel?

302 stainless steel has a higher maximum carbon level than 304. It is often used for wire, spring and cold-worked mechanical parts. 304 usually offers a better all-round balance for welding, forming and general corrosion-resistant fabrication.

Q4: Is 302 stainless steel corrosion resistant?

Yes. 302 stainless steel has good corrosion resistance in mild atmospheric, indoor, fresh water and many general service environments. It is not recommended for severe chloride-rich, marine or highly corrosive chemical environments where 316L or higher-alloy grades are more suitable.

Q5: Is 302 stainless steel magnetic?

302 stainless steel is generally non-magnetic in the annealed condition. After cold working, it may become magnetic because some austenite can transform into deformation-induced martensite.

Q6: Can 302 stainless steel be hardened?

302 stainless steel is not hardened by quenching like martensitic stainless steel. It is mainly strengthened by cold working, such as cold rolling or cold drawing. Annealing can restore ductility and reduce hardness.

Q7: What is 302 stainless steel used for?

302 stainless steel is used for springs, spring wire, fasteners, washers, shims, clips, clamps, retaining rings, wire mesh, screens, conveyor belts, appliance parts, electronic components, automotive trim and precision stamped parts.

Q8: What 302 stainless steel products can XRTGSteel supply?

XRTGSteel supplies 302 stainless steel sheet, plate, coil, strip, precision strip, spring strip, foil, wire, wire rod, round bar, flat bar and custom-cut products. We also provide slitting, cut-to-length, precision shearing, polishing, laser cutting, waterjet cutting, wire processing, machining support and export packing services.

Request 302 Stainless Steel Price

Send your 302 stainless steel grade, product form, size, temper, tensile range, surface finish, processing requirement, quantity and destination port. XRTGSteel will help you confirm the right supply form, standard, condition, tolerance, testing requirement and packing option.

For springs, spring wire, fasteners, washers, shims, clips, retaining rings, wire mesh, screens, appliance parts, electronic components, automotive trim or precision stamped parts, please also send the drawing, tensile requirement, forming route, surface finish and inspection standard. This information helps us compare 302 with 301, 303, 304, 304L, 316L and 17-7PH before quotation.

Request a Quote Online 24/7/365

Scroll to Top

Contact Us

\n