304LN stainless steel is a low-carbon nitrogen-strengthened austenitic stainless steel developed from the 304 stainless steel family. It combines the low-carbon weldability of 304L stainless steel with nitrogen strengthening for higher yield strength, good toughness and reliable corrosion resistance in welded structures.
304LN stainless steel is selected when a project needs stronger mechanical performance than 304L while keeping low-carbon resistance to sensitization after welding. It is widely used for pressure vessels, storage tanks, welded process equipment, cryogenic tanks, LNG-related components, piping systems, structural frames and low-temperature fabrication.
Compared with 304N stainless steel, 304LN has lower carbon and is usually better for welded structures. Compared with 304L, 304LN provides higher yield strength. For chloride-rich, coastal or chemical service, compare 316L stainless steel, 316LN stainless steel, 2205 duplex stainless steel or 2507 super duplex stainless steel.
XRTGSteel supplies 304LN stainless steel in sheet, plate, coil, strip, pipe, tube, round bar, flat bar, angle, channel and custom-cut products. We also provide slitting, cut-to-length, laser cutting, waterjet cutting, surface finishing, polishing, brushing, bending support, welding support, PVC film protection and export packing.
Standards & Equivalent Grades of 304LN Stainless Steel
304LN stainless steel is specified globally for welded, structural, pressure equipment and cryogenic applications. The exact designation may vary by country, product form and standard. For code-controlled projects, confirm the UNS number, standard, mechanical requirement and inspection documents before ordering.
| Country / Region | Standard | Grade / Designation |
|---|---|---|
| International | UNS | S30453 |
| USA | AISI / SAE | 304LN |
| USA | ASTM A240 / ASTM A276 / ASTM A312 / ASTM A666 | Type 304LN / S30453 |
| Europe | EN 10088 | 1.4311 / X2CrNiN18-10 |
| Japan | JIS G 4303 / JIS G 4304 / JIS G 4305 | SUS304LN |
| China | GB / Chinese Reference | 022Cr19Ni10N / 00Cr18Ni10N |
| UK | BS Common Reference | 304S62 / 304S65 family reference, depending on specification |
| Common Market Name | Commercial Designation | SS 304LN / 304LN Stainless Steel / Low-Carbon Nitrogen-Strengthened 304 |
Need to compare more stainless steel grades? Visit our stainless steel grades overview to review 304, 304L, 304N, 304LN, 316L, 316LN, 321, 347, 2205 and other stainless steel grades.
Chemical Composition of 304LN Stainless Steel
304LN stainless steel keeps the chromium-nickel base of 304L and adds controlled nitrogen. Low carbon improves weld corrosion performance. Nitrogen increases yield strength, supports austenite stability and helps maintain good toughness in low-temperature applications.
| Element | Typical Content (wt%) | Role in 304LN Stainless Steel |
|---|---|---|
| C | ≤ 0.030 | Low carbon reduces sensitization risk and improves welded corrosion performance. |
| Cr | 18.00 – 20.00 | Provides stainless corrosion resistance and oxidation resistance. |
| Ni | 8.00 – 12.00 | Stabilizes austenite and improves toughness, ductility and formability. |
| N | 0.10 – 0.16 | Increases yield strength and helps stabilize the austenitic structure. |
| Mn | ≤ 2.00 | Supports steelmaking control and austenite stability. |
| Si | ≤ 1.00 | Supports deoxidation and oxidation resistance. |
| P | ≤ 0.045 | Controlled as a residual element. |
| S | ≤ 0.030 | Controlled to protect ductility, surface quality and corrosion resistance. |
| Fe | Balance | Main base metal. |
Final chemical limits depend on the selected standard and product form. XRTGSteel can supply mill test certificates with heat number, chemical composition, mechanical properties and inspection details.
Mechanical Properties of 304LN Stainless Steel
304LN stainless steel is selected when both low-carbon weldability and higher strength are required. Its nitrogen addition improves yield strength compared with 304L, while the austenitic structure keeps useful ductility and low-temperature toughness.
| Product Form / Condition | Tensile Strength Rm (MPa) | Yield Strength Rp0.2 (MPa) | Elongation A50 (%) | Hardness |
|---|---|---|---|---|
| ASTM A240 sheet / plate, annealed | ≥ 550 typical minimum | ≥ 240 typical minimum | ≥ 40 typical minimum | ≤ 217 HBW typical maximum |
| Annealed coil / strip | 550 – 780 typical | 240 – 420 typical | 35 – 45 typical | ≤ 95 HRB typical maximum |
| Cold-rolled strip | 750 – 1100 typical | 450 – 850 typical | 15 – 35 typical | Higher, depending on temper and cold reduction |
| Pipe / tube, solution annealed | 550 – 780 typical | 240 – 420 typical | 35 – 45 typical | Depends on wall thickness and standard |
| Round bar / flat bar, solution annealed | 550 – 780 typical | ≥ 240 typical minimum | ≥ 35 typical minimum | Depends on diameter and finish |
Mechanical properties depend on thickness, product form, nitrogen content, solution annealing, cold work, test direction and applicable standard. Please send the required ASTM, EN, JIS or GB specification if your project needs a fixed tensile range, yield strength, impact test or hardness limit.
Physical Properties of 304LN Stainless Steel
The physical properties of 304LN stainless steel are close to standard 304L stainless steel. It is generally non-magnetic in the solution-annealed condition. It may become slightly magnetic after cold rolling, bending, forming or machining.
| Property | Typical Value |
|---|---|
| Density | About 7.90 – 8.00 g/cm³ |
| Melting Range | About 1400 – 1450°C |
| Elastic Modulus | About 190 – 200 GPa |
| Thermal Conductivity | About 16 W/m·K at 100°C |
| Electrical Resistivity | About 0.72 μΩ·m |
| Magnetism | Generally non-magnetic when annealed; may become slightly magnetic after cold working |
Key Features of 304LN Stainless Steel
Low Carbon Weldability
304LN limits carbon to reduce sensitization risk after welding. This helps protect corrosion resistance around welded joints.
Nitrogen-Strengthened Performance
Nitrogen increases yield strength compared with 304L. This makes 304LN useful for welded structures, pressure equipment and load-bearing components.
Good Low-Temperature Toughness
304LN keeps an austenitic structure and offers good toughness in many low-temperature and cryogenic applications.
- Low-carbon nitrogen-strengthened 304-type austenitic stainless steel.
- Higher yield strength than 304L stainless steel.
- Excellent weldability and reduced sensitization risk after welding.
- Good intergranular corrosion resistance in welded structures.
- Good general corrosion resistance in atmospheric, fresh water, food-related and mild industrial environments.
- Very good toughness in many low-temperature and cryogenic applications.
- Good formability for bending, rolling, stamping and sheet metal fabrication.
- Not a substitute for 316L or 316LN in severe chloride-rich service.
Corrosion Resistance, Weldability and Cryogenic Performance
304LN stainless steel is commonly used in welded and low-temperature applications where strength, toughness and corrosion resistance must be balanced. It provides 304L-type low-carbon weld performance with higher yield strength from nitrogen strengthening.
| Performance Item | 304LN Stainless Steel Characteristics |
|---|---|
| General Corrosion Resistance | Good in atmospheric, indoor, fresh water, food-related and mild industrial environments. |
| Intergranular Corrosion Resistance | Very good after welding because low carbon reduces chromium carbide precipitation risk. |
| Chloride Resistance | Moderate. For marine, coastal, brine, pool or chloride cleaning exposure, 316L, 316LN, 2205 or 2507 should be reviewed. |
| Weldability | Excellent. 304LN can be welded by TIG, MIG, resistance welding and other standard stainless welding processes. |
| Cryogenic Toughness | Very good. The stable austenitic structure and nitrogen strengthening make 304LN useful in many low-temperature applications. |
| Formability | Good. Higher strength may require greater forming force than 304L, but ductility remains useful for fabrication. |
| Heat Treatment | Not hardenable by quenching. Solution annealing can restore ductility and corrosion resistance after processing. |
| Surface Finish | Available in No.1, 2B, BA, No.4, hairline, brushed, satin, mirror and industrial finishes. |
For general-purpose fabrication, compare 304 stainless steel. For low-carbon welded service without extra strength demand, choose 304L stainless steel. For chloride corrosion resistance, compare 316L stainless steel, 316LN stainless steel, 2205 duplex stainless steel and 2507 super duplex stainless steel.
Typical Applications of 304LN Stainless Steel
304LN stainless steel is selected where low-carbon weldability, higher yield strength and good low-temperature toughness are required. It is especially useful for welded equipment and structural components that need more strength than 304L.
- Pressure vessels, storage tanks, process tanks and welded process equipment.
- Cryogenic tanks, LNG-related components and low-temperature piping systems.
- Industrial platforms, structural frames, supports and fabricated assemblies.
- Food processing equipment, kitchen equipment and hygienic fabrication in mild environments.
- Transportation equipment, railcar structures, containers and vehicle components.
- Heat exchanger parts, piping systems, pipe supports and welded pipe spools.
- Architectural panels, handrails, profiles and building components requiring higher strength.
- General sheet metal fabrication where 304L weldability and higher strength are both needed.
Final material selection should consider welding amount, strength requirement, cryogenic impact requirement, chloride exposure, cleaning method, surface finish, section thickness and applicable design code.
304LN vs 304, 304L, 304N, 316L, 316LN and 321 Stainless Steel
304LN stainless steel is commonly compared with 304, 304L, 304N, 316L, 316LN and 321. These grades are used in welded tanks, pressure equipment, cryogenic components, structural fabrication and corrosion-resistant process systems.
| Item | 304LN | 304 | 304L | 304N | 316L | 316LN | 321 |
|---|---|---|---|---|---|---|---|
| Steel Type | Low-carbon nitrogen-strengthened austenitic stainless steel | General-purpose austenitic stainless steel | Low-carbon austenitic stainless steel | Nitrogen-strengthened 304-family stainless steel | Mo-bearing low-carbon austenitic stainless steel | Mo-bearing low-carbon nitrogen-strengthened austenitic stainless steel | Titanium-stabilized austenitic stainless steel |
| Main Advantage | High strength plus low-carbon weldability | All-round general fabrication | Low-carbon welded corrosion performance | Higher strength than 304 | Better chloride corrosion resistance | Chloride resistance plus higher strength and weldability | Stabilized performance for selected thermal service |
| Carbon Level | Low carbon | Standard 304 carbon limit | Low carbon | Standard 304N carbon limit | Low carbon | Low carbon | Stabilized with titanium |
| Nitrogen Strengthening | Yes | Standard / low | Standard / low | Yes | Not the main design concept | Yes | Not the main design concept |
| Yield Strength | High | Medium | Medium to lower | High | Medium | High | Medium |
| Weldability | Excellent | Very good | Excellent | Good to excellent | Excellent | Excellent | Good with suitable procedure |
| Chloride Resistance | Moderate | Moderate | Moderate | Moderate | Very good | Very good | Moderate |
| Typical Use | Welded high-strength vessels, cryogenic equipment and structures | Food equipment, tanks and general fabrication | Welded tanks, pipes and food equipment | Higher-strength tanks and structural components | Marine-adjacent, chemical and chloride-rich service | Marine, chemical, pressure and low-temperature service | Heat-related welded parts and stabilized service |
Selection Guidance
- Choose 304LN stainless steel when both low-carbon weldability and higher yield strength are required.
- Choose 304 stainless steel when general-purpose corrosion resistance and fabrication performance are enough.
- Choose 304L stainless steel when low-carbon welded performance is required but extra strength is not critical.
- Choose 304N stainless steel when higher strength is needed and a standard carbon limit is acceptable.
- Choose 316L stainless steel or 316LN stainless steel for chloride-rich, coastal, acidic or chemical environments.
- Choose 321 stainless steel when titanium stabilization is required for suitable elevated-temperature service.
304LN Stainless Steel Product Forms
XRTGSteel supplies 304LN stainless steel in standard sizes and custom processed forms. We support pressure equipment manufacturers, tank builders, cryogenic equipment suppliers, structural fabricators, pipework contractors, transportation suppliers and industrial buyers.
| Product Form | Available Options | Typical Use |
|---|---|---|
| 304LN Stainless Steel Sheet / Plate | Cold-rolled sheet, hot-rolled plate, cut sheet, polished sheet and custom plate | Tanks, vessels, cryogenic equipment, structural panels and fabricated parts |
| 304LN Stainless Steel Coil | No.1, 2B, BA, No.4, HL, mirror, PVC film and custom coil weight | Slitting, stamping, roll forming, cut-to-length and distribution stock |
| 304LN Stainless Steel Strip | Narrow strip, precision strip, soft temper and custom width strip | Brackets, supports, formed parts, industrial components and structural strip parts |
| 304LN Stainless Steel Pipe / Tube | Welded pipe, seamless pipe, round tube, square tube and rectangular tube | Process lines, low-temperature piping, pipe spools, supports and welded systems |
| 304LN Stainless Steel Bar | Round bar, flat bar, square bar, angle bar, channel bar, wire and rod | Shafts, supports, fasteners, fittings, machined parts and load-bearing components |
Processing and Surface Finish Options
304LN stainless steel projects often require accurate dimensions, stable mechanical properties and reliable inspection documents. XRTGSteel can combine material supply with value-added processing before shipment.
| Processing Service | What We Can Provide |
|---|---|
| Cut-to-Length Processing | Cut 304LN stainless steel coil into sheets with required length, width, flatness and packing quantity. |
| Slitting Service | Slit 304LN stainless steel coil into narrow strip for roll forming, stamping and fabrication. |
| Surface Finishing | Supply No.1, 2B, BA, No.4, hairline, brushed, satin, mirror and industrial finish options. |
| Laser Cutting | Prepare 304LN stainless steel blanks, panels, brackets and custom parts according to drawings. |
| Waterjet Cutting | Cut thicker plate or complex shapes when heat-affected zones need to be avoided. |
| Export Packing | Use waterproof paper, PVC film, wooden pallets, wooden cases and container loading support. |
For pressure equipment, cryogenic or welded structural projects, please confirm testing requirements, impact test requirements, surface finish, tolerance, marking and inspection documents before production.
How to Order 304LN Stainless Steel from XRTGSteel
A complete inquiry helps us check grade availability, mill route, processing method, packing plan and freight options. Please send clear technical and commercial details when requesting a quotation.
- Grade: 304LN, UNS S30453, 1.4311, X2CrNiN18-10, SUS304LN or 022Cr19Ni10N.
- Product form: sheet, plate, coil, strip, pipe, tube, bar, angle, channel or custom part.
- Size: thickness, width, length, outside diameter, wall thickness or bar diameter.
- Surface finish: No.1, 2B, BA, No.4, hairline, mirror, polished or custom finish.
- Processing: slitting, cut-to-length, laser cutting, waterjet cutting, polishing, brushing, bending or PVC film.
- Mechanical requirement: tensile strength, yield strength, elongation, hardness or impact test if needed.
- Welding requirement: pressure equipment welding, pipe welding, tank welding or structural fabrication.
- Quantity: pieces, kilograms, tons, coil weight or bundle quantity.
- Standard: ASTM, EN, JIS, GB, ASME or project specification.
- Documents: MTC, inspection report, PMI, impact test report, packing list, certificate of origin or third-party inspection.
- Delivery term: FOB, CFR, CIF, DDP or other agreed Incoterms.
If you are not sure whether 304LN stainless steel is suitable, send your service environment, drawing, welding method and strength requirement. Our team can compare 304LN with 304L, 304N, 316L, 316LN, 321 and 2205 before quotation.
FAQ – 304LN Stainless Steel
Q1: What is 304LN stainless steel?
304LN stainless steel is a low-carbon nitrogen-strengthened version of 304 stainless steel. It contains chromium, nickel, low carbon and controlled nitrogen. This gives it higher strength than 304L while maintaining excellent weldability and good corrosion resistance.
Q2: What is the UNS number of 304LN stainless steel?
The UNS number of 304LN stainless steel is S30453. It is also commonly associated with AISI 304LN, EN 1.4311, X2CrNiN18-10, JIS SUS304LN and GB 022Cr19Ni10N.
Q3: What is the difference between 304L and 304LN stainless steel?
Both 304L and 304LN are low-carbon stainless steels. The main difference is nitrogen. 304LN contains controlled nitrogen, which improves yield strength and makes it more suitable for high-strength welded structures and cryogenic applications.
Q4: What is the difference between 304N and 304LN stainless steel?
304N and 304LN are both nitrogen-strengthened 304-family stainless steels. 304LN has lower carbon, so it is usually preferred for welded structures where both higher strength and low-carbon weld corrosion performance are required.
Q5: Is 304LN stainless steel corrosion resistant?
Yes. 304LN stainless steel provides good general corrosion resistance similar to 304 and 304L stainless steel. It performs well in atmospheric, fresh water, food-related and mild industrial environments. For marine or chloride-rich environments, 316L, 316LN or duplex stainless steel is usually a better choice.
Q6: Can 304LN stainless steel be welded?
Yes. 304LN stainless steel has excellent weldability. Its low carbon content helps reduce sensitization risk after welding, while nitrogen provides additional strength for welded structures and pressure equipment.
Q7: Is 304LN stainless steel suitable for cryogenic service?
Yes. 304LN is commonly used in low-temperature and cryogenic applications because its austenitic structure provides good toughness. Nitrogen improves strength without sacrificing useful ductility.
Q8: What 304LN stainless steel products can XRTGSteel supply?
XRTGSteel supplies 304LN stainless steel sheet, plate, coil, strip, pipe, tube, round bar, flat bar, angle, channel and custom-cut products. We also provide slitting, cut-to-length, laser cutting, waterjet cutting, surface finishing, bending support, welding support, PVC film protection and export packing.
Request 304LN Stainless Steel Price
Send your 304LN stainless steel grade, product form, size, surface finish, mechanical requirement, quantity and destination port. XRTGSteel will help you choose a suitable supply form, processing route and export packing method.
For pressure equipment, cryogenic service or welded structural projects, please also send the applicable standard, yield strength requirement, impact test requirement, inspection documents and service environment. Our team can compare 304LN with 304L, 304N, 316L, 316LN and 2205 before quotation.
