310H Stainless Steel

310H Stainless Steel

310H stainless steel is a high-carbon heat-resistant austenitic stainless steel from the 310 series. It contains high chromium and high nickel. As a result, it offers excellent oxidation resistance and strong high-temperature stability.

This grade is designed for hot service. Compared with 310S stainless steel, 310H has controlled higher carbon. Therefore, it provides better hot strength and improved creep resistance.

310H stainless steel is used for furnace parts, radiant tubes, retorts, kiln parts, burner components and high-temperature processing systems. It is also used in petrochemical equipment and thermal processing plants.

XRTGSteel supplies 310H stainless steel in sheet, plate, coil, strip, pipe, tube and bar. In addition, we provide cut-to-length, slitting, laser cutting, surface finishing, sawing, testing support and export packing.

What Is 310H Stainless Steel?

Basic Grade Definition

310H stainless steel is a 25Cr-20Ni heat-resistant stainless steel. It belongs to the austenitic stainless steel family. Its high chromium helps resist oxidation. Meanwhile, high nickel supports toughness and structure stability.

Main Performance Advantage

The main advantage of 310H is high-temperature strength. The controlled carbon range helps improve creep resistance. For this reason, 310H is selected for hot parts that carry load for long service periods.

Typical Buying Reason

Buyers choose 310H when 310S does not provide enough hot strength. However, 310S may be better when low carbon and easier welding are more important. Therefore, the service temperature and fabrication method should be reviewed before ordering.

Standards & Equivalent Grades of 310H Stainless Steel

International Grade References

310H stainless steel is available under several international standards. However, equivalent grades are not always exact matches. Therefore, the order standard and mill test certificate should be checked before production.

Country / RegionStandardGrade / Designation
InternationalUNSS31009
USAAISI / SAE310H
USAASTM A240 / A276 / A312 / A479Type 310H
EuropeEN 10095 / EN 10088 Reference1.4845 / X8CrNi25-21 family reference
JapanJIS ReferenceSUS310S family reference, depending on specification
ChinaGB ReferenceHeat-resistant 06Cr25Ni20 family reference
Common NameMarket NameSS 310H / High-Carbon 310 Stainless Steel

Ordering Note

310H should be ordered by UNS number, product standard and carbon requirement. In some markets, 310S and 310H may use related chemistry ranges. However, 310H must meet the required carbon range and project specification.

More materials are listed in our stainless steel grades overview. You can compare 309S, 310S, 310H, 304H, 316H, 321, 347 and 446 there.

Chemical Composition of 310H Stainless Steel

Main Alloy Design

310H stainless steel uses high chromium, high nickel and controlled higher carbon. Chromium improves oxidation resistance. Nickel helps keep the austenitic structure stable. Carbon improves strength at elevated temperature.

ElementTypical ContentMain Function
C0.04 – 0.10%Improves hot strength and creep resistance.
Cr24.00 – 26.00%Provides oxidation and scaling resistance.
Ni19.00 – 22.00%Supports austenite stability and toughness.
Mn≤ 2.00%Supports steelmaking control.
Si≤ 1.50%Supports oxidation resistance and deoxidation.
P≤ 0.045%Controlled residual element.
S≤ 0.030%Controlled for ductility and hot workability.
FeBalanceMain base metal.

Composition Check Before Order

Chemical limits can change by standard and product form. Therefore, final acceptance should follow the purchase standard and MTC. XRTGSteel can provide heat number, chemical analysis and mechanical test results for export orders.

Mechanical Properties of 310H Stainless Steel

Room-Temperature Properties

310H stainless steel offers good strength and ductility after solution annealing. Still, its main value is high-temperature performance. For pressure or load-bearing hot parts, design-code data should be reviewed.

Product Form / ConditionTensile StrengthYield StrengthElongationHardness
Annealed sheet / plate≥ 515 MPa≥ 205 MPa≥ 40%≤ 217 HBW typical
Annealed coil / strip515 – 760 MPa typical≥ 205 MPa typical35 – 40% typical≤ 95 HRB typical
Cold-worked strip700 – 1050 MPa typical350 – 800 MPa typical10 – 35% typicalDepends on temper
Pipe / tube515 – 760 MPa typical205 – 380 MPa typical35 – 45% typicalDepends on wall thickness
Round bar / forged bar515 – 780 MPa typical205 – 400 MPa typical30 – 45% typicalDepends on size

High-Temperature Design Note

High-temperature strength depends on temperature, time and load. In addition, creep resistance can be affected by atmosphere and thermal cycling. For critical parts, allowable stress data should follow the project design code.

Physical Properties of 310H Stainless Steel

Typical Physical Data

The physical properties of 310H stainless steel are close to the 310 series. This grade is generally non-magnetic after solution annealing. However, slight magnetism may appear after cold work.

PropertyTypical Value
DensityAbout 7.98 g/cm³
Melting RangeAbout 1400 – 1450°C
Elastic ModulusAbout 193 GPa
Thermal ConductivityAbout 14 – 16 W/m·K at 100°C
Electrical ResistivityAbout 0.78 μΩ·m
MagnetismGenerally non-magnetic when annealed

Practical Service Note

Physical data should not be used alone for material selection. Instead, temperature, atmosphere, pressure and mechanical load should be reviewed together. This gives a safer basis for high-temperature equipment design.

Key Features of 310H Stainless Steel

Performance Highlights

310H stainless steel is chosen for demanding heat exposure. It combines excellent oxidation resistance with better high-temperature strength than 310S. In addition, it remains useful for many fabricated thermal parts.

Higher Hot Strength

Controlled carbon helps 310H keep strength at elevated temperatures.

Excellent Oxidation Resistance

High chromium helps resist scaling in many hot oxidizing atmospheres.

Good Thermal Stability

High nickel supports austenite stability during heat exposure.

Summary of Advantages

  • High-carbon 310 series austenitic stainless steel.
  • Designed for elevated-temperature and creep-resistant service.
  • Excellent oxidation resistance in many hot oxidizing atmospheres.
  • Higher hot strength than 310S stainless steel.
  • Good resistance to scaling and thermal fatigue in suitable service.
  • Good ductility and formability after solution annealing.
  • Available as sheet, plate, coil, strip, pipe, tube and bar.
  • Needs technical review in wet chloride, reducing or sulfur-bearing service.

Oxidation Resistance, Heat Resistance and Fabrication

Oxidizing High-Temperature Service

310H stainless steel performs well in many oxidizing high-temperature atmospheres. Because of its high chromium content, it forms a protective oxide scale. As a result, it resists scaling better than many standard 300-series grades.

Creep and Hot Strength

The higher carbon range improves creep strength. Therefore, 310H is used for hot parts that must keep strength over time. This is important for radiant tubes, furnace supports and petrochemical high-temperature components.

Welding and Forming

310H stainless steel can be welded with common stainless steel welding methods. However, heat input control and filler selection are important. After welding, cleaning helps protect surface quality and corrosion resistance.

Performance Item310H Stainless Steel Characteristics
Oxidation ResistanceExcellent in many oxidizing high-temperature atmospheres.
High-Temperature StrengthBetter than 310S because of controlled higher carbon.
Creep ResistanceImproved for long-term heat exposure and load-bearing thermal parts.
WeldabilityGood with proper filler, heat input control and post-weld cleaning.
FormabilityGood after solution annealing, although higher force may be required.
Heat TreatmentNot hardenable by quenching. Solution annealing restores ductility.

For low-carbon weldability, compare 310S stainless steel. For less severe heat exposure, review 309S stainless steel. For stabilized hot service, compare 321 stainless steel or 347 stainless steel.

Typical Applications of 310H Stainless Steel

Furnace and Heat-Treatment Equipment

310H stainless steel is widely used in furnace systems. Common parts include furnace linings, radiant tubes, burner nozzles, muffles and retorts. In addition, it is used for trays, baskets and heat-treatment fixtures.

Petrochemical and Refinery Equipment

Petrochemical plants use 310H for suitable high-temperature components. Examples include heater parts, shields, transition pieces and thermal processing assemblies. However, the medium and atmosphere should be checked before selection.

Kiln and Industrial Processing Systems

Kilns, dryers and combustion systems often need oxidation resistance and hot strength. Therefore, 310H is used for supports, ducts, combustion chambers and hot gas manifolds. It can also be used for high-temperature fasteners and brackets.

  • Furnace linings, furnace rolls, doors and supports.
  • Radiant tubes, retorts, muffles and burner nozzles.
  • Combustion chambers and hot gas manifolds.
  • Heat-treatment baskets, trays, racks and fixtures.
  • Kiln components, annealing boxes and high-temperature supports.
  • Petrochemical heaters and refinery thermal parts.
  • Heat exchangers and waste heat recovery systems.
  • High-temperature fasteners, brackets and hangers.

310H vs 310S, 309S, 304H, 316H, 321, 347 and 446 Stainless Steel

Quick Comparison

Buyers often compare 310H with other heat-resistant grades. Each grade has a different balance of oxidation resistance, hot strength, cost and weldability. Therefore, the service condition should guide the final choice.

GradeMain AdvantageTypical Use
310HHigh hot strength and improved creep resistance.Radiant tubes, furnace supports and creep-resistant hot parts.
310SLow carbon, good weldability and excellent oxidation resistance.Furnace liners, hot ducts and heat-treatment fixtures.
309SGood heat resistance with lower alloy cost.Furnace parts and thermal shields.
304H304-family elevated-temperature strength.Boilers and hot process piping.
316HHot strength plus molybdenum-bearing corrosion resistance.Heat exchangers and process equipment.
321 / 347Stabilized performance for selected thermal service.Expansion joints and welded hot parts.
446High-chromium ferritic oxidation resistance.Burners, combustion chambers and furnace parts.

Selection Guidance

  • Choose 310H when high-temperature strength and creep resistance are the main requirements.
  • Choose 310S when low carbon and easier weldability are more important.
  • Choose 309S when heat resistance is needed but the service condition is less severe.
  • Choose 304H for many moderate 304-family high-temperature pressure parts.
  • Choose 316H when molybdenum-bearing corrosion resistance is also needed.
  • Choose 321 or 347 when stabilized stainless steel is required.
  • Choose 446 when a ferritic heat-resistant grade is suitable.

310H Stainless Steel Product Forms

Sheet, Plate and Coil

XRTGSteel supplies 310H sheet, plate and coil for furnace and heat-resistant fabrication. These products can be cut, slit, polished or packed according to the order.

Product FormAvailable OptionsTypical Use
310H Sheet / PlateHot-rolled plate, cold-rolled sheet and cut plate.Furnace parts, heat shields and thermal panels.
310H CoilNo.1, 2B, BA, No.4 and custom coil weight.Cut-to-length, slitting and formed parts.
310H StripNarrow strip and custom width strip.Heat-treatment fixtures and formed supports.

Pipe, Tube and Bar

Pipe, tube and bar are common choices for high-temperature equipment. For example, they are used in radiant tubes, supports, fixtures and machined thermal parts.

Product FormAvailable OptionsTypical Use
310H Pipe / TubeSeamless pipe, welded pipe, radiant tube and heat exchanger tube.Hot gas ducting, radiant tubes and high-temperature lines.
310H BarRound bar, flat bar, forged bar, angle and channel.Supports, brackets, fasteners, shafts and fittings.

Processing and Testing Support

Processing Services

XRTGSteel can process 310H stainless steel before shipment. This helps buyers save time and control fabrication cost. Available services include cutting, slitting, surface finishing and sawing.

ServiceWhat We Provide
Cut-to-LengthCut coil into sheets with required length and packing quantity.
SlittingSlit coil into narrow strip for forming and fabrication.
Surface FinishingSupply No.1, 2B, BA, No.4 and polished finishes.
Laser CuttingPrepare blanks, heat shields and custom parts.
Saw CuttingCut bar, pipe and tube to required length.
Export PackingUse waterproof paper, pallets, wooden cases and bundle protection.

Inspection Support

For critical projects, we can coordinate PMI, tensile testing, hardness testing and third-party inspection. In addition, we can supply MTC documents, packing records and inspection reports.

How to Order 310H Stainless Steel from XRTGSteel

Information Needed for Quotation

A clear inquiry helps us quote faster. Please send the grade, size, quantity, surface finish and delivery destination. For heat-service projects, service conditions are also important.

  • Grade: 310H, UNS S31009 or project-specified equivalent.
  • Product form: sheet, plate, coil, strip, pipe, tube, bar or custom part.
  • Size: thickness, width, length, diameter or wall thickness.
  • Surface finish: No.1, 2B, BA, No.4, polished or pickled.
  • Processing: slitting, cutting, laser cutting, sawing or polishing.
  • Service condition: temperature, atmosphere, load and exposure time.
  • Testing requirement: MTC, PMI, tensile test or third-party inspection.
  • Quantity: pieces, kilograms, tons, coil weight or bundle quantity.
  • Delivery term: FOB, CFR, CIF, DDP or other agreed Incoterms.

Material Selection Support

If the best grade is not clear, send your drawing and service condition. Our team can compare 310H with 310S, 309S, 304H, 316H, 321, 347 and 446. Therefore, you can choose a safer material before ordering.

FAQ – 310H Stainless Steel

Q1: What is 310H stainless steel?

310H stainless steel is a high-carbon 310 series austenitic stainless steel. It contains high chromium and high nickel. Therefore, it offers excellent oxidation resistance and improved high-temperature strength.

Q2: What is the UNS number of 310H stainless steel?

The UNS number is S31009. This grade is commonly ordered as AISI 310H or Type 310H under ASTM standards.

Q3: What is the difference between 310S and 310H stainless steel?

310S has lower carbon and better weldability. However, 310H has controlled higher carbon. As a result, 310H gives better hot strength and creep resistance.

Q4: Is 310H good for high-temperature applications?

Yes. 310H is designed for high-temperature service. It is used for furnace equipment, radiant tubes, retorts, kiln parts and petrochemical thermal components.

Q5: Can 310H stainless steel be welded?

Yes. 310H can be welded by common stainless steel welding methods. However, proper filler selection, heat input control and post-weld cleaning are recommended.

Q6: Is 310H stainless steel corrosion resistant?

310H has good resistance in many dry and hot environments. However, it is not designed mainly for wet chloride or marine service. For those conditions, 316L or higher-alloy corrosion-resistant grades should be reviewed.

Q7: Is 310H stainless steel magnetic?

310H is generally non-magnetic in the annealed condition. Slight magnetism may appear after cold working, forming or machining.

Q8: What 310H products can XRTGSteel supply?

XRTGSteel supplies 310H sheet, plate, coil, strip, pipe, tube and bar. We also provide cutting, slitting, finishing, sawing, testing support and export packing.

Request 310H Stainless Steel Price

Send your 310H stainless steel grade, product form, size, finish, quantity and destination port. XRTGSteel will help you confirm the right supply form and processing route.

For furnace, radiant tube, kiln, refinery or petrochemical projects, please also send the service temperature, load and atmosphere. This information helps us compare 310H with 310S, 309S, 304H, 316H, 321, 347 and 446 before quotation.

Request a Quote Online 24/7/365

Scroll to Top

Contact Us