440C stainless steel is a very high-carbon high-chromium martensitic stainless steel. It is designed for maximum hardness, excellent wear resistance, heat-treatable strength and moderate corrosion resistance. It is widely used for bearings, precision tools, valve parts, industrial blades, surgical instruments and polished wear-resistant components.
440C has the highest carbon level in the common 440 stainless steel family. Therefore, it offers higher hardness and stronger wear resistance than 440A stainless steel and 440B stainless steel. However, machining, grinding and heat treatment must be controlled carefully.
Compared with 420 stainless steel, 440C stainless steel provides much higher hardness potential and better wear resistance. Compared with 431 stainless steel, 440C is better for high-hardness wear parts, while 431 is better for high-strength shafts that need more toughness.
XRTGSteel supplies 440C stainless steel in round bar, flat bar, forged bar, plate, sheet, strip, rod, wire and custom-cut machining blanks. We also provide saw cutting, peeling, turning, grinding, polishing, lapping, chamfering, straightening, heat treatment support, CNC machining support and export-grade packing.
What Is 440C Stainless Steel?
Basic Grade Definition
440C stainless steel is a hardenable martensitic stainless steel with very high carbon and high chromium. It belongs to the 440 stainless steel family. The grade is magnetic in annealed, hardened and tempered conditions.
Main Performance Advantage
The main advantage of 440C is maximum hardness and wear resistance. It can be annealed for machining. Then it can be hardened and tempered to obtain very high hardness, edge retention and dimensional stability.
Typical Buying Reason
Buyers choose 440C when 440A or 440B does not provide enough hardness or wear resistance. It is a strong option for bearings, valve balls, valve seats, precision tools, gauges, dies, punches, cutting parts and high-wear components. For severe chloride or chemical service, 316L stainless steel or higher-alloy stainless steel should be reviewed.
Standards & Equivalent Grades of 440C Stainless Steel
International Grade References
440C stainless steel is supplied under several international standards. Equivalent grades can vary by product form, heat treatment condition and order specification. Therefore, the final order should confirm the UNS number, chemical limits, hardness range and mill test certificate.
| Country / Region | Standard | Grade / Designation |
|---|---|---|
| International | UNS | S44004 |
| USA | AISI / SAE | 440C |
| USA | ASTM A276 / A314 / A473 / A479 / A580 | Type 440C / S44004 |
| Europe / DIN | EN 10088 / DIN | 1.4125 / X105CrMo17 |
| Japan | JIS G 4303 / G 4304 / G 4305 | SUS440C |
| China | GB Reference | 108Cr17 / 11Cr17 / 9Cr18Mo, depending on specification |
| ISO | ISO Common Reference | X105CrMo17 / 440C family reference |
| Common Name | Market Name | SS 440C / 440C Stainless Steel |
Ordering Note
For bearings, precision tools, valve parts and wear-resistant components, do not rely only on the grade name. Confirm the required standard, carbon range, heat treatment condition, hardness target, surface finish and inspection documents before production.
More materials are listed in our stainless steel grades overview. You can compare 420, 420F, 431, 440A, 440B, 440C, 440F, 304 and 316L there.
Chemical Composition of 440C Stainless Steel
Main Alloy Design
440C stainless steel uses very high carbon and high chromium chemistry. Carbon improves hardenability, hardness and wear resistance. Chromium supports stainless corrosion resistance, carbide formation and polishability.
| Element | Typical Content | Main Function |
|---|---|---|
| C | 0.95 – 1.20% | Improves hardenability, maximum hardness, edge retention and wear resistance. |
| Cr | 16.00 – 18.00% | Provides stainless corrosion resistance and supports hard carbide formation. |
| Mo | ≤ 0.75%, when specified | May support hardenability and selected corrosion requirements. |
| Mn | ≤ 1.00% | Supports steelmaking control. |
| Si | ≤ 1.00% | Supports deoxidation during steelmaking. |
| P | ≤ 0.040% | Controlled residual element. |
| S | ≤ 0.030% | Controlled for toughness, polishability and surface quality. |
| Ni | ≤ 0.75%, when specified | May support toughness and stability. |
| Fe | Balance | Main base metal. |
Composition Check Before Order
Chemical limits can change by standard and mill specification. Therefore, final acceptance should follow the purchase standard and MTC. For bearing, blade and precision-tool projects, carbon control, cleanliness and surface quality should also be reviewed.
Mechanical Properties of 440C Stainless Steel
Annealed and Heat-Treated Conditions
440C stainless steel is normally used after hardening and tempering. Actual values depend on product form, section size, austenitizing temperature, quenching method, tempering temperature and final surface condition.
| Condition / Product Form | Tensile Strength | Yield Strength | Elongation | Hardness |
|---|---|---|---|---|
| Annealed bar / rod | 760 – 950 MPa typical | 425 – 650 MPa typical | 10 – 18% typical | ≤ 269 HBW / about 97 HRB typical |
| Soft annealed machining stock | 700 – 900 MPa typical | 400 – 600 MPa typical | 10 – 20% typical | About 220 – 260 HBW typical |
| Hardened and tempered, moderate hardness | 1200 – 1700 MPa typical | 900 – 1300 MPa typical | 2 – 8% typical | About 55 – 58 HRC, depending on temper |
| Hardened and tempered, high hardness | 1700 – 2000 MPa typical | 1300 – 1900 MPa typical | 1 – 5% typical | About 58 – 60 HRC, depending on heat treatment |
| Custom bearing / blade / wear part | Project-specific | Project-specific | Project-specific | Controlled by drawing and heat treatment requirement |
Mechanical Property Note
440C is heat-treatable. Hardening is normally followed by tempering. This gives the required balance of hardness, wear resistance, toughness, corrosion resistance and dimensional stability.
Physical Properties of 440C Stainless Steel
Typical Physical Data
The physical properties of 440C stainless steel are typical for very high-carbon martensitic stainless steels. It is magnetic in annealed, hardened and tempered conditions. This magnetic behavior is normal for 440C stainless steel.
| Property | Typical Value |
|---|---|
| Density | About 7.65 – 7.80 g/cm³ |
| Melting Range | About 1370 – 1480°C |
| Elastic Modulus | About 200 GPa |
| Thermal Conductivity | About 24 W/m·K at 100°C |
| Electrical Resistivity | About 0.60 μΩ·m typical |
| Magnetism | Magnetic in annealed, hardened and tempered conditions |
Practical Service Note
Physical data should not be used alone for material selection. Instead, hardness target, heat treatment, corrosion exposure, wear load, edge geometry, polishing requirement and toughness requirement should be reviewed together. This gives a safer basis for selecting 440C stainless steel.
Key Features of 440C Stainless Steel
Performance Highlights
440C stainless steel is selected when maximum hardness, excellent wear resistance and polished surface quality are required. It gives the highest hardness potential in the common 440 family. It also provides good dimensional stability when heat treatment and grinding are controlled correctly.
Highest 440 Series Hardness
440C has the highest carbon level in the common 440 family and can reach very high hardness.
Excellent Wear Resistance
The very high carbon and chromium levels support hard carbide formation and long wear life.
Precision Polished Parts
440C is widely used for bearings, valve balls, gauges, lapped parts and precision components.
Summary of Advantages
- Very high-carbon high-chromium martensitic stainless steel.
- Highest hardness potential in the common 440 stainless steel family.
- Excellent wear resistance after proper hardening and tempering.
- Good edge retention for blades, cutting tools and precision edges.
- Excellent polishability for bearings, valve balls and high-finish parts.
- Good dimensional stability when heat treatment and grinding are controlled.
- Magnetic in all common supply and heat-treated conditions.
- Lower toughness and more difficult machining than 440A and 440B, especially at high hardness.
Heat Treatment, Corrosion Resistance and Machinability
Heat Treatment
440C stainless steel can be annealed, hardened and tempered. Correct austenitizing, quenching and tempering are essential for hardness, wear resistance and dimensional stability. For precision bearing parts, cryogenic treatment guidance may also be reviewed.
Corrosion Resistance
440C has moderate corrosion resistance. Best results are usually achieved after hardening, tempering, fine grinding, polishing and passivation. It should not be selected for severe chloride, marine, acidic or long-term wet exposure without engineering review.
Machining and Welding
Machinability is fair in the annealed condition and difficult after hardening. Hardened material requires rigid equipment, sharp tooling, coolant control and proper grinding practice. Welding is generally not recommended because 440C is high-carbon and hardenable.
| Performance Item | 440C Stainless Steel Characteristics |
|---|---|
| Heat Treatment | Can be annealed, hardened and tempered for controlled hardness, wear resistance and dimensional stability. |
| Hardness and Wear Resistance | Excellent after hardening and tempering. It is suitable for bearings, precision tools and high-wear parts. |
| Corrosion Resistance | Moderate. Best results are achieved with smooth polished surfaces and correct heat treatment. |
| Machinability | Fair in annealed condition and difficult after hardening. Grinding control is important. |
| Weldability | Poor compared with austenitic grades. Welding is usually avoided. |
| Formability | Limited. 440C is mainly selected for machining, grinding, polishing and heat-treated parts. |
| Polishability | Excellent. Polishing, lapping and passivation help improve surface quality and corrosion performance. |
For easier machining, review 420F stainless steel, 416 stainless steel or 440F stainless steel. For better toughness balance, compare 440A stainless steel or 440B stainless steel. For better corrosion resistance and weldability, review 304 stainless steel or 316L stainless steel.
Typical Applications of 440C Stainless Steel
Bearings and Precision Wear Components
440C stainless steel is widely used for stainless ball bearings, bearing races, rolling elements and precision bearing components. It offers very high hardness, excellent wear resistance and good polishability. Heat treatment, grinding and lapping are important for final bearing performance.
Blades, Cutting Edges and Tools
Industrial blades, cutting edges, slitting tools and precision tools may use 440C when wear resistance and edge retention are critical. The grade is also used for gauges, dies, punches and high-wear tooling parts. It is less suitable when impact toughness is the main design requirement.
Valve, Pump and Polished Mechanical Parts
Valve seats, valve balls, valve parts, pump components and nozzles often need hard polished stainless surfaces. 440C is useful in mild corrosion environments where high wear resistance is required. For severe corrosion, another stainless grade should be considered.
- Stainless ball bearings, bearing races, rolling elements and precision bearing components.
- Industrial blades, cutting edges, slitting tools and wear-resistant cutting parts.
- Surgical instruments, dental instruments and precision medical components where standards allow.
- Valve seats, valve balls, valve parts, pump components and nozzles.
- Measuring tools, gauges, dies, punches and high-wear tooling parts.
- Shafts, pins, bushings, sleeves and machined wear parts.
- Food processing blades and equipment components in mild corrosion environments.
- Precision machined stainless parts requiring hardening, grinding, lapping and polishing.
440C vs 440A, 440B, 420, 420F, 431, 440F, 304 and 316L Stainless Steel
Quick Comparison
Buyers often compare 440C with martensitic, free-machining and austenitic stainless steels. Each grade has a different balance of hardness, toughness, wear resistance, machinability and corrosion resistance. Therefore, the final choice should follow the target hardness and service environment.
| Grade | Steel Type | Main Advantage | Typical Use |
|---|---|---|---|
| 440C | Very high-carbon high-chromium martensitic stainless steel | Maximum hardness and wear resistance in the common 440 family. | Bearings, precision tools, valve parts and high-wear components. |
| 440A | High-carbon martensitic stainless steel | Better toughness and corrosion balance than higher-carbon 440 grades. | Cutlery, instruments, bearings and wear parts. |
| 440B | High-carbon martensitic stainless steel | Balanced high hardness, wear resistance and toughness. | Blades, bearings, tooling and precision wear parts. |
| 420 | Hardenable martensitic stainless steel | General hardness and corrosion balance. | Blades, shafts, molds and wear parts. |
| 420F | Free-machining martensitic stainless steel | Better machining than standard 420. | Machined tool parts, fasteners and fittings. |
| 431 | Nickel-bearing martensitic stainless steel | High strength plus better toughness and corrosion resistance. | Shafts, marine parts, bolts and aerospace hardware. |
| 440F | Free-machining high-carbon martensitic stainless steel | 440-series hardness potential plus better machining. | Machined shafts, fittings, fasteners and wear parts. |
| 304 | Austenitic chromium-nickel stainless steel | Better corrosion resistance, weldability and formability. | Tanks, kitchen equipment, food equipment and structures. |
| 316L | Austenitic molybdenum-bearing stainless steel | Better chloride and chemical corrosion resistance. | Marine, chemical, food and pharmaceutical equipment. |
Selection Guidance
- Choose 440C when maximum hardness and wear resistance are the main priorities.
- Choose 440A when better toughness and corrosion balance are more important than maximum hardness.
- Choose 440B when a balanced combination of hardness, wear resistance and toughness is required.
- Choose 420 when a more general martensitic stainless steel with good availability is sufficient.
- Choose 420F or 416 when machining speed and chip control are more important than corrosion resistance.
- Choose 431 when higher toughness and better martensitic corrosion resistance are required for shafts and mechanical parts.
- Choose 440F when 440-series hardness potential and free machining are both required.
- Choose 304 or 316L when weldability, formability and corrosion resistance are more important than hardness.
440C Stainless Steel Product Forms
Bar, Rod and Forged Products
XRTGSteel supplies 440C bar products for bearings, precision tools, valve parts and high-hardness machined components. Common forms include round bar, flat bar, forged bar, rod, peeled bar, turned bar and ground bar.
| Product Form | Available Options | Typical Use |
|---|---|---|
| 440C Round / Flat Bar | Round bar, flat bar, peeled bar, turned bar and centerless ground bar. | Bearings, shafts, valve balls, pins, tools and machined wear parts. |
| 440C Forged Bar | Forged round bar, forged flat bar and custom forged sections. | Bearings, valve parts, tooling, dies, punches and high-load wear parts. |
| 440C Rod / Wire | Rod, wire, straightened wire and custom cut lengths. | Pins, clips, instruments, small tools and precision mechanical parts. |
Sheet, Plate, Strip and Custom Cut Products
Sheet, plate and strip can be supplied for blades, cutting blanks, tool parts and wear-resistant components. These products can be cut, slit, polished, ground or packed according to the order.
| Product Form | Available Options | Typical Use |
|---|---|---|
| 440C Sheet / Plate | Hot-rolled plate, cold-rolled sheet, cut plate and custom blanks. | Blades, tools, bearing parts, valve parts, panels and wear plates. |
| 440C Strip | Narrow strip, precision strip and custom width strip. | Blade strips, precision shims, small cutting parts and tooling blanks. |
| 440C Custom Parts | Cut blanks, semi-finished parts and machined components. | Instrument parts, valve parts, tool parts, bearing parts and custom hardware. |
Processing and Testing Support
Processing Services
XRTGSteel can process 440C stainless steel before shipment. This helps buyers save machining time and control production cost. Available services include cutting, peeling, turning, grinding, polishing, lapping, chamfering and heat treatment support.
| Service | What We Provide |
|---|---|
| Saw Cutting | Cut round bar, flat bar, forged bar, rod and wire to required length. |
| Peeling / Turning | Prepare peeled bar, turned bar and bright bar for machining. |
| Grinding | Supply ground bar and centerless ground bar for tighter tolerance needs. |
| Lapping / Polishing | Support polished, lapped and high-finish surfaces for precision parts. |
| Chamfering | Chamfer bar ends for faster loading into machining operations. |
| Cut-to-Length | Cut sheet, plate or strip into blanks with required length. |
| Slitting | Slit strip or coil into narrow width for blades, shims and precision parts. |
| Surface Finishing | Supply black, pickled, peeled, turned, ground, polished, bright, mirror and lapped finishes. |
| Laser Cutting | Prepare plates, blanks, blade shapes and custom mechanical parts. |
| Heat Treatment Support | Coordinate annealing, hardening, tempering, stress relieving and cryogenic treatment guidance. |
| Machining Support | Support CNC turning, drilling, milling, grinding, polishing and semi-finished preparation. |
| Export Packing | Use plastic protection, bundle packing, wooden pallet, wooden case and seaworthy packing. |
Inspection Support
For critical projects, we can coordinate PMI, chemical analysis, tensile testing, hardness testing, dimensional inspection, surface inspection and third-party inspection. In addition, we can supply MTC documents, packing records and inspection reports.
How to Order 440C Stainless Steel from XRTGSteel
Information Needed for Quotation
A clear inquiry helps us quote faster. Please send the grade, size, quantity, surface condition and delivery destination. For 440C stainless steel, heat treatment, hardness target and surface finish are especially important.
- Grade: 440C, UNS S44004, SUS440C, 1.4125, X105CrMo17, 108Cr17 or project-specified equivalent.
- Product form: round bar, flat bar, forged bar, plate, sheet, strip, rod, wire or custom blank.
- Size: diameter, width, thickness, length, strip tolerance or blank dimension.
- Condition: annealed, hardened and tempered, peeled, turned, ground, polished, lapped or bright drawn.
- Mechanical requirement: tensile strength, yield strength, elongation, hardness or impact value.
- Surface finish: black, pickled, peeled, turned, ground, polished, mirror, lapped or custom finish.
- Processing: saw cutting, slitting, laser cutting, shearing, peeling, turning, grinding, lapping, polishing or CNC support.
- Service condition: hardness target, wear load, edge retention, corrosion exposure, dimensional stability and cleaning method.
- Testing requirement: MTC, PMI, tensile test, hardness test, surface inspection or third-party inspection.
- Quantity: pieces, kilograms, tons, bar bundles, strip coils or cut length quantity.
- Delivery term: FOB, CFR, CIF, DDP or other agreed Incoterms.
Material Selection Support
If the best grade is not clear, send your drawing, hardness target and application. Our team can compare 440C with 440A, 440B, 420, 420F, 431, 440F, 304 and 316L. Therefore, you can choose a safer material before ordering.
FAQ – 440C Stainless Steel
Q1: What is 440C stainless steel?
440C stainless steel is a very high-carbon high-chromium martensitic stainless steel. It is heat-treatable and offers maximum hardness, excellent wear resistance, moderate corrosion resistance and good polishability for bearings, precision tools, valve parts and wear-resistant components.
Q2: What is the UNS number of 440C stainless steel?
The UNS number is S44004. Common references include AISI 440C, Type 440C, SUS440C, EN 1.4125, X105CrMo17, 108Cr17, 11Cr17 and 9Cr18Mo.
Q3: What is the difference between 440A, 440B and 440C stainless steel?
The main difference is carbon content. 440A has the lowest carbon in the common 440 family. 440B is in the middle. 440C has the highest carbon and provides the highest hardness and wear resistance.
Q4: What is the difference between 420 and 440C stainless steel?
440C has higher carbon and chromium than many 420 stainless steel specifications. Therefore, 440C normally provides much higher hardness and wear resistance after heat treatment. 420 is often selected when a more general hardenable stainless steel is enough.
Q5: Is 440C stainless steel corrosion resistant?
440C stainless steel has moderate corrosion resistance. It performs best after hardening, tempering and polishing. It is suitable for dry atmosphere, fresh water and mild environments, but it is not recommended for severe chloride-rich, marine or acidic service.
Q6: Can 440C stainless steel be hardened?
Yes. 440C stainless steel can be hardened and tempered to obtain very high hardness and excellent wear resistance. Final hardness depends on section size, austenitizing temperature, quenching method, tempering temperature and surface condition.
Q7: Can 440C stainless steel be welded?
Welding 440C stainless steel is generally not recommended. The grade is very high-carbon and hardenable, so cracking risk is high. If welding is unavoidable, preheating, controlled heat input and post-weld heat treatment are normally required.
Q8: Is 440C stainless steel magnetic?
Yes. 440C stainless steel is martensitic and magnetic. It remains magnetic in annealed, hardened and tempered conditions.
Q9: What 440C stainless steel products can XRTGSteel supply?
XRTGSteel supplies 440C round bar, flat bar, forged bar, rod, wire, plate, sheet, strip and custom-cut machining blanks. We also provide cutting, peeling, turning, grinding, polishing, lapping, chamfering, heat treatment support, machining support and export packing.
Request 440C Stainless Steel Price
Send your 440C stainless steel grade, product form, size, condition, hardness requirement, quantity and destination port. XRTGSteel will help you confirm the right supply form, heat treatment route and processing option.
For bearings, bearing races, valve balls, valve seats, precision tools, surgical instruments, gauges, dies, punches, blades or polished wear-resistant components, please also send the drawing, target hardness, surface finish and testing requirement. This information helps us compare 440C with 440A, 440B, 420, 420F, 431, 440F, 304 and 316L before quotation.
