446 stainless steel is a high-chromium ferritic heat-resistant stainless steel. It is designed for excellent oxidation resistance, strong scaling resistance and good resistance to many sulfur-bearing hot gas environments. It is widely used for furnace parts, burners, kiln components, radiant tubes, retorts, combustion chambers and industrial thermal processing equipment.
The main feature of 446 stainless steel is its high chromium content. The 23–27% chromium range gives 446 much stronger high-temperature oxidation resistance than many common ferritic stainless steels. It also supports good sulfidation resistance in suitable oxidizing sulfur-bearing atmospheres.
Compared with 430 stainless steel, 446 stainless steel has much better high-temperature scaling resistance. Compared with 441 stainless steel, 446 has higher chromium and better severe oxidation resistance. Compared with 310H stainless steel, 446 is nickel-free and magnetic, but it has lower high-temperature strength and lower ductility.
XRTGSteel supplies 446 stainless steel in sheet, plate, coil, strip, pipe, tube, seamless tube, welded tube, flat bar, round bar, forged bar, wire and custom-cut products. We also provide cut-to-length, slitting, surface finishing, laser cutting, plasma cutting, waterjet cutting, saw cutting, bending, welding support, heat-resistant fabrication support and export-grade packing.
What Is 446 Stainless Steel?
Basic Grade Definition
446 stainless steel is a ferritic heat-resistant stainless steel with very high chromium content. It is not hardenable by heat treatment. It is magnetic in annealed, cold-worked, welded and fabricated conditions.
Main Performance Advantage
The main advantage of 446 is severe high-temperature oxidation resistance. It resists scaling better than many lower-chromium ferritic grades. This makes it useful for furnace, burner, kiln and hot gas service where oxidation resistance is more important than creep strength.
Typical Buying Reason
Buyers choose 446 when furnace parts, burners, radiant tubes or hot gas components need strong scaling resistance. It is also selected for selected sulfur-bearing atmospheres, oil-ash corrosion conditions and thermal processing equipment. For high-temperature pressure equipment, 310H or nickel alloys may be more suitable.
Standards & Equivalent Grades of 446 Stainless Steel
International Grade References
446 stainless steel is supplied under several international standards. Equivalent grades can vary by product form, nitrogen level, chromium range, heat-resistant steel system and order specification. Therefore, the final order should confirm the required standard, chemical limits, heat treatment condition and MTC.
| Country / Region | Standard | Grade / Designation |
|---|---|---|
| International | UNS | S44600 |
| USA | AISI / SAE | 446 / SAE 51446 |
| USA | ASTM A240 / A268 / A276 / A314 / A473 / A511 / A580 | Type 446 / TP446 / S44600 |
| Europe / DIN | EN / DIN Common Reference | 1.4762 / X10CrAlSi25, or 1.4749 / X18CrN28 depending on specification |
| Japan | JIS Common Reference | SUS446 / SUH446 |
| China | GB Reference | 2Cr25N / heat-resistant ferritic reference, depending on specification |
| Russia | GOST Common Reference | Х27 / Kh27, depending on specification |
| Common Name | Market Name | SS 446 / 446 Stainless Steel / Alloy 446 |
Ordering Note
For furnace parts, burners, radiant tubes, kiln components or sulfur-bearing hot gas service, do not rely only on the grade name. Confirm the standard, chromium range, nitrogen level, surface condition, annealed condition, testing requirement and mill test certificate before production.
More materials are listed in our stainless steel grades overview. You can compare 446, 430, 441, 444, 309S, 310S, 310H, 304 and 316L there.
Chemical Composition of 446 Stainless Steel
Main Alloy Design
446 stainless steel uses high-chromium ferritic chemistry. Chromium is the key element for excellent oxidation resistance, scaling resistance and high-temperature surface stability. Nitrogen, silicon or aluminum may also be controlled in some heat-resistant specifications.
| Element | Typical Content | Main Function |
|---|---|---|
| C | ≤ 0.20% | Controlled to support ferritic structure and heat-resistant service. |
| Cr | 23.00 – 27.00% | Provides excellent oxidation resistance, scaling resistance and hot corrosion resistance. |
| Mn | ≤ 1.50% | Supports steelmaking control. |
| Si | ≤ 1.00% | Supports deoxidation and oxidation resistance. |
| N | ≤ 0.25%, depending on standard | May support strength and heat-resistant performance in selected specifications. |
| Ni | ≤ 0.75%, when specified | Usually low. Helps maintain ferritic structure and nickel-free cost advantage. |
| P | ≤ 0.040% | Controlled residual element. |
| S | ≤ 0.030% | Controlled for ductility, weldability and surface quality. |
| Al / Si | May be controlled in selected EN heat-resistant variants | Can improve oxidation resistance in specific heat-resistant steel systems. |
| Fe | Balance | Main base metal. |
Composition Check Before Order
Chemical limits can change by standard and product form. Therefore, final acceptance should follow the purchase standard and MTC. For severe heat service, chromium range, nitrogen level, grain size and surface condition should be checked carefully.
Mechanical Properties of 446 Stainless Steel
Annealed Sheet, Plate, Bar and Tube
446 stainless steel is normally supplied in annealed condition. Actual mechanical properties depend on product form, thickness, bar diameter, annealing condition, grain size, cold work level and testing direction.
| Condition / Product Form | Tensile Strength | Yield Strength | Elongation | Hardness |
|---|---|---|---|---|
| Annealed sheet / plate | 450 – 650 MPa typical | ≥ 275 MPa typical | ≥ 20% typical | ≤ 219 HBW typical |
| Annealed coil / strip | 450 – 620 MPa typical | 275 – 380 MPa typical | 18 – 28% typical | ≤ 95 HRB typical |
| Round bar / forged bar, annealed | 450 – 700 MPa typical | ≥ 275 MPa typical | 15 – 25% typical | Depends on diameter and annealing condition |
| Pipe / tube, annealed | 450 – 650 MPa typical | ≥ 275 MPa typical | Depends on tube size and process | Depends on forming and finish |
| Custom heat-resistant component | Project-specific | Project-specific | Project-specific | Controlled by drawing and fabrication route |
Mechanical Property Note
446 stainless steel cannot be hardened by quenching. It can be moderately strengthened by cold working. Annealing is used to restore ductility, reduce forming stress and improve fabrication behavior.
Physical Properties of 446 Stainless Steel
Typical Physical Data
The physical properties of 446 stainless steel are typical for high-chromium ferritic stainless steels. It has stable magnetic behavior and useful thermal conductivity. It is magnetic in annealed, cold-worked and welded conditions.
| Property | Typical Value |
|---|---|
| Density | About 7.70 – 7.80 g/cm³ |
| Melting Range | About 1480 – 1510°C |
| Elastic Modulus | About 200 GPa |
| Thermal Conductivity | About 21 – 24 W/m·K, depending on temperature |
| Electrical Resistivity | About 0.60 – 0.70 μΩ·m typical |
| Magnetism | Magnetic in annealed, cold-worked and welded conditions |
Practical Service Note
Physical data should not be used alone for material selection. Instead, atmosphere, service temperature, thermal cycling, stress level, welding route, oxidation condition and sulfur exposure should be reviewed together. This gives a safer basis for selecting 446 stainless steel.
Key Features of 446 Stainless Steel
Performance Highlights
446 stainless steel is selected when oxidation resistance, sulfidation resistance and scaling resistance are the main service requirements. It is best known as a high-chromium ferritic stainless steel for furnace and hot gas applications.
Excellent Oxidation Resistance
High chromium provides strong resistance to scaling in high-temperature air and oxidizing atmospheres.
Good Sulfidation Resistance
446 performs well in many oxidizing sulfur-bearing hot gas environments.
Nickel-Free Ferritic Grade
Low nickel content gives a cost advantage over high-nickel heat-resistant stainless steels.
Summary of Advantages
- High-chromium ferritic stainless steel for severe high-temperature oxidation service.
- Excellent scaling resistance in high-temperature air and oxidizing atmospheres.
- Good resistance to sulfidation in selected oxidizing sulfur-bearing atmospheres.
- Useful for furnaces, burners, kilns, retorts and thermal processing equipment.
- Magnetic in all common supply and service conditions.
- Nickel-free ferritic stainless steel with stable cost advantages over high-nickel heat-resistant grades.
- Not hardenable by heat treatment.
- Lower ductility and high-temperature strength than austenitic heat-resistant grades such as 310H.
Heat Resistance, Oxidation Resistance and Fabrication
Heat and Oxidation Resistance
446 stainless steel is mainly selected for high-temperature environments where oxidation resistance is critical. Its high chromium level supports strong scale formation and improved hot surface stability. This makes it suitable for furnace parts, burner parts, kiln components and hot gas service.
Sulfidation and Hot Corrosion Resistance
446 can perform well in many sulfur-bearing hot gas environments, especially when the atmosphere is oxidizing. It can also be used in selected oil-ash, combustion and thermal processing conditions. The exact suitability depends on gas chemistry, temperature, cycling and mechanical stress.
Weldability and Formability
446 stainless steel can be welded, but it requires careful procedure control. Preheating, low heat input, controlled cooling and qualified filler selection may be required. Formability is moderate in annealed condition and lower than 304, 316L and many lower-chromium ferritic grades.
| Performance Item | 446 Stainless Steel Characteristics |
|---|---|
| Oxidation Resistance | Excellent. High chromium provides strong scaling resistance in hot air and oxidizing atmospheres. |
| Sulfidation Resistance | Very good in many oxidizing sulfur-bearing hot gas environments. |
| Hot Corrosion Resistance | Good in many furnace, burner, kiln and thermal processing atmospheres. |
| High-Temperature Strength | Limited compared with austenitic heat-resistant grades such as 310H. |
| Weldability | Fair. Welding needs careful procedure control to reduce cracking and brittleness risk. |
| Formability | Moderate in annealed condition. Lower than 304, 316L and many lower-chromium ferritic grades. |
| Heat Treatment | Not hardenable by quenching. Annealing improves ductility and reduces fabrication stress. |
For high-temperature strength and creep resistance, choose 310H stainless steel. For ferritic exhaust systems with better formability, review 441 stainless steel. For water heaters, heat exchangers and chloride stress corrosion cracking resistance, compare 444 stainless steel. For chloride-rich wet corrosion, choose 316L stainless steel or a higher-alloy stainless steel.
Typical Applications of 446 Stainless Steel
Furnace and Heat Treatment Equipment
446 stainless steel is widely used for furnace parts, furnace linings, muffle furnaces, retorts and heat treatment fixtures. It provides strong oxidation resistance and scaling resistance in many high-temperature environments.
Burners, Kilns and Hot Gas Components
Burners, burner nozzles, combustion chambers and kiln components often need high-temperature surface stability. Therefore, 446 is used for ceramic kiln parts, glass furnace parts, hot gas baffles, heating element supports and refractory anchors.
Petrochemical and Sulfur-Bearing Service
446 stainless steel is also used in selected petrochemical heaters, catalyst supports, incinerator parts and sulfur-bearing hot gas systems. It is chosen when sulfidation resistance and scaling resistance are more important than high-temperature creep strength.
- Furnace parts, furnace linings, muffle furnaces, retorts and heat treatment fixtures.
- Burners, burner nozzles, combustion chambers and high-temperature ducting.
- Kiln components, ceramic kiln parts, glass furnace parts and refractory anchors.
- Radiant tubes, thermowells, heating element supports and hot gas baffles.
- Petrochemical heaters, catalyst supports, incinerator parts and sulfur-bearing hot gas systems.
- Oil-ash corrosion environments, boiler baffles and selected power generation thermal parts.
- Molten copper, brass, lead or tin contact components where the project specification allows.
- Industrial thermal processing equipment requiring high-chromium ferritic stainless steel.
446 vs 430, 441, 444, 309S, 310H, 304 and 316L Stainless Steel
Quick Comparison
Buyers often compare 446 with ferritic, austenitic and heat-resistant stainless steels. Each grade has a different balance of oxidation resistance, high-temperature strength, wet corrosion resistance, weldability, formability and cost. Therefore, the final choice should follow the actual temperature, atmosphere and mechanical load.
| Grade | Steel Type | Main Advantage | Typical Use |
|---|---|---|---|
| 446 | High-chromium ferritic heat-resistant stainless steel | Excellent oxidation, sulfidation and scaling resistance. | Furnaces, burners, kilns, retorts and sulfur-bearing hot gas parts. |
| 430 | Ferritic 17Cr stainless steel | Economical appearance and moderate corrosion resistance. | Appliances, decorative panels and indoor structures. |
| 441 | Nb + Ti dual-stabilized ferritic stainless steel | Good exhaust durability and high-temperature stability. | Exhaust manifolds, converters and thermal parts. |
| 444 | Molybdenum-bearing stabilized ferritic stainless steel | Strong pitting and chloride SCC resistance for ferritic service. | Water heaters, heat exchangers and chloride SCC-resistant parts. |
| 309S | Austenitic heat-resistant stainless steel | Good oxidation resistance with better ductility than many ferritic heat-resistant grades. | Furnace parts, heat treatment equipment and thermal processing components. |
| 310H | High-carbon austenitic heat-resistant stainless steel | High-temperature strength, creep resistance and oxidation resistance. | High-temperature pressure equipment, furnace parts and thermal processing systems. |
| 304 | Austenitic chromium-nickel stainless steel | Better room-temperature formability, weldability and general corrosion resistance. | Tanks, food equipment, kitchen equipment and welded structures. |
| 316L | Austenitic molybdenum-bearing stainless steel | Better wet chloride and chemical corrosion resistance. | Marine, chemical, food and pharmaceutical equipment. |
Selection Guidance
- Choose 446 when oxidation resistance, sulfidation resistance and scaling resistance are the main requirements.
- Choose 430 when cost, magnetic behavior and indoor appearance are more important than high-temperature scaling resistance.
- Choose 441 when ferritic exhaust durability, better formability and thermal fatigue performance are required.
- Choose 444 when wet corrosion, hot water service or chloride stress corrosion cracking resistance is more important.
- Choose 309S when better ductility and austenitic heat-resistant fabrication are required.
- Choose 310H when high-temperature strength, creep resistance and pressure equipment performance are required.
- Choose 304 or 316L when room-temperature corrosion resistance, weldability and formability are more important than scaling resistance.
446 Stainless Steel Product Forms
Sheet, Plate, Coil and Strip
XRTGSteel supplies 446 sheet, plate, coil and strip for furnaces, burners, kilns, thermal processing equipment and heat-resistant fabricated parts. These products can be cut, slit, leveled, polished, brushed or packed according to the order.
| Product Form | Available Options | Typical Use |
|---|---|---|
| 446 Sheet / Plate | Hot-rolled plate, cold-rolled sheet, pickled sheet, cut plate and custom blanks. | Furnace panels, baffles, kiln parts, retorts and heat-resistant fabricated parts. |
| 446 Coil | No.1, 2B, pickled, mill edge, slit edge and custom coil weight. | Cut-to-length processing, heat-resistant sheets and fabricated components. |
| 446 Strip | Narrow strip, precision strip and custom width strip. | Heating element supports, brackets, clamps and formed heat-resistant parts. |
Pipe, Tube, Bar, Wire and Custom Products
446 pipe, tube, bar and wire are used for radiant tubes, burner parts, supports, hot gas ducting and thermal processing assemblies. They can be supplied in standard sizes or processed into custom-cut parts.
| Product Form | Available Options | Typical Use |
|---|---|---|
| 446 Pipe / Tube | Seamless tube, welded tube, heat-resistant pipe, radiant tube and custom cut tube. | Radiant tubes, burner tubes, hot gas ducting and thermal processing equipment. |
| 446 Flat / Round Bar | Flat bar, round bar, forged bar, cut bar, machined bar and custom lengths. | Supports, fixtures, furnace hardware, brackets and heat-resistant mechanical parts. |
| 446 Wire / Custom Parts | Wire, cut wire, laser-cut blanks, formed parts, welded parts and semi-finished components. | Heating supports, refractory anchors, furnace fittings and custom thermal equipment parts. |
Processing and Testing Support
Processing Services
XRTGSteel can process 446 stainless steel before shipment. This helps buyers save fabrication time and control production cost. Available services include cut-to-length, slitting, laser cutting, plasma cutting, waterjet cutting, saw cutting, bending and export packing.
| Service | What We Provide |
|---|---|
| Cut-to-Length | Cut coil into sheets or blanks with required length and packing quantity. |
| Slitting | Slit coil into narrow strip for brackets, clamps and formed heat-resistant parts. |
| Surface Finishing | Supply No.1, 2B, pickled, ground, polished, brushed and custom industrial finishes. |
| Laser Cutting | Prepare sheets, plates, blanks, brackets and custom heat-resistant parts. |
| Plasma / Waterjet Cutting | Cut thicker plate and industrial heat-resistant blanks when required. |
| Saw Cutting | Cut bar, tube, pipe, forged bar and profiles to required length. |
| Forming Support | Support bending, rolling, light forming, tube forming and heat-resistant fabrication guidance. |
| Welding Support | Support welding procedure review, heat input control and post-weld cleaning consultation. |
| Export Packing | Use waterproof paper, PVC film, steel frame, wooden pallet, wooden case and seaworthy packing. |
Inspection Support
For project orders, we can coordinate PMI, chemical analysis, tensile testing, hardness testing, thickness inspection, surface inspection, dimensional inspection and third-party inspection. In addition, we can supply MTC documents, packing records and inspection reports.
How to Order 446 Stainless Steel from XRTGSteel
Information Needed for Quotation
A clear inquiry helps us quote faster. Please send the grade, product form, size, quantity, surface finish and delivery destination. For 446 stainless steel, service temperature, atmosphere and fabrication route are especially important.
- Grade: 446, UNS S44600, AISI 446, TP446, SUS446, SUH446 or project-specified equivalent.
- Product form: sheet, plate, coil, strip, seamless tube, welded tube, pipe, flat bar, round bar, forged bar, wire or custom blank.
- Size: thickness, width, length, diameter, wall thickness, bar size, tube size or strip tolerance.
- Condition: annealed, hot rolled, cold rolled, pickled, ground, polished, slit, cut, formed or welded.
- Surface finish: No.1, 2B, pickled, ground, polished, brushed or custom industrial heat-resistant finish.
- Processing: cut-to-length, slitting, laser cutting, plasma cutting, waterjet cutting, saw cutting, bending or welding support.
- Service condition: furnace atmosphere, oxidation, sulfidation, hot gas, thermal cycling, oil ash or combustion environment.
- Testing requirement: MTC, PMI, tensile test, hardness test, thickness report, surface inspection or third-party inspection.
- Quantity: sheets, pieces, kilograms, tons, coil weight, strip coils, tube bundles or bar bundles.
- Delivery term: FOB, CFR, CIF, DDP or other agreed Incoterms.
Material Selection Support
If the best grade is not clear, send your drawing, service temperature, atmosphere, welding method and load condition. Our team can compare 446 with 430, 441, 444, 309S, 310H, 304 and 316L. Therefore, you can choose a safer material before ordering.
FAQ – 446 Stainless Steel
Q1: What is 446 stainless steel?
446 stainless steel is a high-chromium ferritic heat-resistant stainless steel. It provides excellent oxidation resistance, strong scaling resistance, good sulfidation resistance and stable magnetic stainless performance for furnace, burner, kiln and hot gas applications.
Q2: What is the UNS number of 446 stainless steel?
The UNS number is S44600. Common references include AISI 446, Type 446, TP446, SAE 51446, SUS446, SUH446 and Alloy 446.
Q3: What is 446 stainless steel used for?
446 stainless steel is commonly used for furnace parts, burners, radiant tubes, muffle furnaces, retorts, kiln components, combustion chambers, heat treatment fixtures, petrochemical heaters and sulfur-bearing hot gas systems.
Q4: What is the difference between 446 and 430 stainless steel?
446 stainless steel has much higher chromium content than 430 stainless steel. This gives 446 much stronger oxidation, scaling and sulfidation resistance at high temperatures. 430 is mainly used for economical decorative, appliance and indoor applications.
Q5: Is 446 stainless steel heat resistant?
Yes. 446 stainless steel is mainly selected for heat-resistant service. It performs well in high-temperature oxidizing and sulfur-bearing atmospheres. However, its high-temperature mechanical strength is lower than austenitic heat-resistant grades such as 310H.
Q6: Can 446 stainless steel be hardened?
No. 446 stainless steel is ferritic and cannot be hardened by heat treatment. It can be moderately strengthened by cold working. Annealing is used to restore ductility and improve fabrication behavior.
Q7: Is 446 stainless steel magnetic?
Yes. 446 stainless steel is ferritic and magnetic in annealed, cold-worked and welded conditions. This magnetic behavior is normal for ferritic stainless steel grades.
Q8: What 446 stainless steel products can XRTGSteel supply?
XRTGSteel supplies 446 stainless steel sheet, plate, coil, strip, seamless tube, welded tube, pipe, flat bar, round bar, forged bar, wire and custom-cut products. We also provide slitting, cut-to-length, polishing, laser cutting, plasma cutting, tube forming, bending, welding support and export packing.
Request 446 Stainless Steel Price
Send your 446 stainless steel grade, product form, size, surface finish, processing requirement, quantity and destination port. XRTGSteel will help you confirm the right supply form, chromium range, surface condition, tolerance and packing option.
For furnace parts, burners, kiln components, radiant tubes, retorts, combustion chambers, sulfur-bearing hot gas systems or thermal processing equipment, please also send the drawing, service temperature, atmosphere, welding method and testing requirement. This information helps us compare 446 with 430, 441, 444, 309S, 310H, 304 and 316L before quotation.
