904L Stainless Steel: Composition, Corrosion Resistance and Uses

904L Stainless Steel

904L stainless steel is a high-alloy austenitic stainless steel with very low carbon, high nickel, high molybdenum and copper. It is commonly specified as UNS N08904, EN 1.4539 and X1NiCrMoCu25-20-5. This grade is designed for severe corrosion service, especially in sulfuric acid, phosphoric acid, chloride-bearing media and chemical process environments.

Compared with 316L stainless steel, 904L stainless steel offers much stronger resistance to reducing acids, pitting, crevice corrosion and chloride stress corrosion cracking. Compared with 317L stainless steel, it provides a higher nickel and molybdenum alloy design with copper for improved acid resistance.

Compared with 2205 duplex stainless steel, 904L stainless steel has a fully austenitic structure and better performance in many sulfuric acid conditions. However, 2205 usually offers higher strength. For severe chloride service, 2507 super duplex stainless steel should also be reviewed.

XRTGSteel supplies 904L stainless steel in sheet, plate, coil, strip, seamless pipe, welded pipe, tube, flat bar, round bar, forged bar, flange, fitting and custom-cut products. We also provide cut-to-length, slitting, surface finishing, laser cutting, plasma cutting, waterjet cutting, bending, rolling, machining support, welding support and export-grade packing.

What Is 904L Stainless Steel?

Basic Grade Definition

904L stainless steel is a non-stabilized high-alloy austenitic stainless steel. It contains high nickel and molybdenum with copper addition. The low carbon content helps reduce carbide precipitation during welding. The austenitic structure gives good toughness and good fabrication behavior.

Main Performance Advantage

The main advantage of 904L stainless steel is strong corrosion resistance in severe acid and chloride-bearing environments. It was developed for service where standard 300 series stainless steels do not provide enough protection. It is widely used in chemical processing, petrochemical equipment, acid handling, seawater cooling, pulp and paper, fertilizer production and pollution control systems.

Technical Reference

Alleima® 2RK65 is a well-known 904L stainless steel reference. You can review a technical material reference on the Alleima® 2RK65 904L datasheet page. Final purchasing should still follow the required ASTM, ASME, EN, ISO, NACE or project specification.

Standards & Equivalent Grades of 904L Stainless Steel

International Grade References

904L stainless steel is supplied under several international standards. Equivalent grades can vary by product form, pressure code, heat treatment condition, testing requirement and customer specification. The final order should confirm the UNS number, EN designation, product standard and mill test certificate.

Country / RegionStandardGrade / Designation
InternationalUNSN08904
Common NameMarket Name904L / Alloy 904L / Super Austenitic 904L
Europe / DINEN 100881.4539 / X1NiCrMoCu25-20-5
USAASTM A240 / A276 / A479UNS N08904, depending on product form
USAASTM A182F904L, when specified for forged flanges and fittings
USAASTM A312 / A269 / A358UNS N08904 pipe and tube references, when applicable
ASMEASME SA240 / SA182 / SA312N08904 / F904L, when accepted by project code
SwedenSS Reference2562
United KingdomBS Reference904S13
Common NameMarket Name904L Stainless Steel / N08904 Stainless Steel / 1.4539 Stainless Steel

Ordering Note

For acid service, pressure vessels, heat exchangers, chemical piping, seawater cooling systems or NACE-related projects, do not rely only on the name 904L. Confirm the required ASTM or EN standard, solution annealed condition, corrosion test, PMI, pressure code, welding requirement and MTC before production.

More high-alloy and stainless steel materials are listed in our stainless steel grades overview. You can compare 904L stainless steel with 316L, 317L, 317LMN, 2205, 2507, 304L and 316Ti there.

Chemical Composition of 904L Stainless Steel

Main Alloy Design

904L stainless steel uses high nickel, high molybdenum and copper to improve corrosion resistance. Nickel improves resistance to stress corrosion cracking. Molybdenum improves pitting and crevice corrosion resistance. Copper improves resistance to sulfuric acid and other reducing acids.

ElementTypical ContentMain Function
C≤ 0.020%Very low carbon supports weldability and intergranular corrosion resistance.
Cr19.00 – 23.00%Provides stainless corrosion resistance and oxidation resistance.
Ni23.00 – 28.00%Improves austenite stability, toughness and stress corrosion cracking resistance.
Mo4.00 – 5.00%Improves pitting resistance, crevice corrosion resistance and acid resistance.
Cu1.00 – 2.00%Improves resistance to sulfuric acid and other reducing acid environments.
Mn≤ 2.00%Supports steelmaking control and austenite stability.
Si≤ 1.00%Supports deoxidation and steelmaking control.
P≤ 0.045%Controlled residual element.
S≤ 0.035%, lower sulfur may be specifiedControlled for weldability, hot workability and corrosion performance.
FeBalanceMain base metal.

Composition Check Before Order

Chemical limits can change by standard and product form. Final acceptance should follow the purchase standard and MTC. For severe corrosion service, nickel, molybdenum, copper, carbon and sulfur levels should be checked carefully.

Mechanical Properties of 904L Stainless Steel

Solution Annealed Products

904L stainless steel is normally supplied in solution annealed and pickled condition. It is not hardened by heat treatment. Actual values depend on product form, thickness, diameter, cold work level, heat treatment and test direction.

Condition / Product FormTensile StrengthYield StrengthElongationHardness
Solution annealed sheet / plate≥ 490 MPa typical minimum≥ 220 MPa typical minimum≥ 35% typical minimum≤ 90 HRB typical maximum
Solution annealed coil / strip490 – 690 MPa typical220 – 350 MPa typical35 – 50% typicalDepends on thickness and finish
Pipe / tube, solution annealed≥ 490 MPa typical≥ 220 MPa typical≥ 35% typicalDepends on tube size and process
Round bar / flat bar, solution annealed520 – 750 MPa typical≥ 220 MPa typical30 – 45% typicalDepends on diameter and heat treatment
Forging / flange / fittingProject-specificProject-specificProject-specificControlled by ASTM, ASME or customer specification

Mechanical Property Note

904L stainless steel is selected mainly for corrosion resistance, not for high strength. Cold working can increase strength, but it may affect formability and fabrication route. For strength-controlled chloride service, 2205 or 2507 duplex stainless steel may be more suitable.

Physical Properties of 904L Stainless Steel

Typical Physical Data

The physical properties of 904L stainless steel are typical for high-alloy austenitic stainless steels. It has high toughness, low magnetic response in annealed condition and good formability. It also has lower thermal conductivity and higher thermal expansion than ferritic and duplex stainless steels.

PropertyTypical Value
DensityAbout 7.95 – 8.00 g/cm³
Melting RangeAbout 1300 – 1390°C
Elastic ModulusAbout 190 – 200 GPa
Thermal ConductivityAbout 12 – 14 W/m·K around room temperature to 100°C
Electrical ResistivityAbout 0.85 – 0.95 μΩ·m typical
Thermal ExpansionHigh, similar to other austenitic stainless steels
MagnetismGenerally non-magnetic in annealed condition

Practical Service Note

Physical data should not be used alone for material selection. Acid concentration, chloride level, temperature, pH, welding method, pressure code, cleaning chemicals and surface finish should be reviewed together.

Key Features of 904L Stainless Steel

Performance Highlights

904L stainless steel is selected when severe corrosion conditions require a high-alloy austenitic material. It is especially useful in sulfuric acid, phosphoric acid, acetic acid, seawater cooling, oil refining, chemical processing and pollution control applications.

Strong Acid Resistance

High nickel, molybdenum and copper improve resistance in many reducing acid environments.

Better Chloride Resistance

904L offers better pitting and crevice corrosion resistance than 304L and 316L.

Good Weldability

Very low carbon supports welding without the same sensitization risk as higher-carbon grades.

Summary of Advantages

  • High-alloy austenitic stainless steel for severe corrosion service.
  • Very good resistance to sulfuric acid and many reducing acid environments.
  • Better pitting and crevice corrosion resistance than standard 304L and 316L stainless steel.
  • Good resistance to chloride stress corrosion cracking compared with standard austenitic grades.
  • Good weldability due to very low carbon content.
  • Good formability and toughness because of fully austenitic structure.
  • Generally non-magnetic in annealed condition.
  • Useful for chemical, petrochemical, refinery, pulp and paper, fertilizer and seawater cooling systems.

Corrosion Resistance, Weldability and Fabrication

Corrosion Resistance

904L stainless steel offers excellent resistance in many sulfuric acid, phosphoric acid, acetic acid and chloride-bearing environments. Its high nickel content improves stress corrosion cracking resistance. Its molybdenum and copper additions improve resistance to pitting, crevice corrosion and reducing acids.

Weldability

904L stainless steel has good weldability with standard austenitic welding methods. Preheating is normally not required. Post-weld heat treatment is normally not required for many applications. However, filler metal selection, heat input, interpass temperature and post-weld cleaning should be controlled for corrosion-critical service.

Forming and Machining

904L stainless steel has good formability and ductility. It requires higher forming force than lower-alloy austenitic grades because of its high alloy content. Machining should use rigid setup, sharp tools, positive feed and suitable coolant to control work hardening.

Performance Item904L Stainless Steel Characteristics
General Corrosion ResistanceExcellent in many severe chemical, refinery, acid and industrial environments.
Acid ResistanceVery good in many sulfuric acid, phosphoric acid and acetic acid conditions.
Pitting ResistanceBetter than 304L and 316L because of high molybdenum content.
Crevice Corrosion ResistanceBetter than many standard austenitic stainless steels, but service temperature and chloride level must be reviewed.
Stress Corrosion CrackingBetter than standard 300 series grades due to high nickel content.
WeldabilityGood with suitable austenitic welding procedures and proper post-weld cleaning.
FormabilityGood, with higher forming force than standard 304L and 316L.
Heat TreatmentSolution annealing restores corrosion resistance after heavy processing when required.

For general-purpose stainless fabrication, choose 304L stainless steel. For moderate chloride resistance, choose 316L stainless steel. For stronger molybdenum-bearing austenitic performance, review 317L stainless steel or 317LMN stainless steel. For high-strength chloride service, compare 2205 duplex stainless steel or 2507 super duplex stainless steel.

Typical Applications of 904L Stainless Steel

Chemical and Petrochemical Processing

904L stainless steel is widely used in chemical processing equipment, petrochemical plants, acid handling systems, storage tanks, reactors, scrubbers, separators, flanges, fittings and process piping. It is useful when sulfuric acid, phosphoric acid or mixed acid service requires stronger corrosion resistance than 316L.

Oil Refining, Fertilizer and Pollution Control

Oil refineries, fertilizer plants and pollution control systems often require resistance to acids, chlorides and industrial condensates. Therefore, 904L is used for refinery units, fertilizer equipment, flue gas desulfurization systems, scrubbers, absorbers and process vessels.

Seawater Cooling, Pulp and Paper, Food and Pharma

904L stainless steel is also used for seawater cooling components, pulp and paper equipment, bleaching systems, pickling equipment, food processing systems and pharmaceutical equipment. The final selection should always consider chloride concentration, acid level, temperature and cleaning chemicals.

  • Chemical processing equipment, acid handling systems, reactors and storage tanks.
  • Petrochemical equipment, oil refinery components, process piping and heat exchangers.
  • Sulfuric acid equipment, phosphoric acid equipment and mixed acid process lines.
  • Fertilizer plants, phosphate processing equipment and acid production units.
  • Flue gas desulfurization systems, scrubbers, absorbers and pollution control equipment.
  • Seawater cooling systems, coastal industrial equipment and selected marine components.
  • Pulp and paper equipment, bleaching systems, washers and process vessels.
  • Food processing, pharmaceutical equipment, pickling tanks and high-cleanliness process parts.

904L Stainless Steel vs 316L, 317L, 317LMN, 2205, 2507 and 304L

Quick Comparison

Buyers often compare 904L stainless steel with standard austenitic, high-molybdenum austenitic and duplex stainless steels. Each grade has a different balance of acid resistance, chloride resistance, strength, weldability, formability and cost. The final choice should follow the service environment, design code and fabrication method.

GradeSteel TypeMain AdvantageTypical Use
904LHigh-alloy austenitic stainless steelStrong acid resistance, high nickel content and good chloride resistance.Chemical, petrochemical, sulfuric acid, phosphoric acid and refinery service.
316LMolybdenum-bearing austenitic stainless steelGood chloride resistance with easy fabrication and broad availability.Marine-adjacent equipment, food equipment and general chemical service.
317LHigher-molybdenum austenitic stainless steelBetter pitting resistance than 316L.Chemical equipment, pulp and paper, dyeing and acidic service.
317LMNNitrogen-strengthened high-molybdenum austenitic stainless steelHigher strength and improved localized corrosion resistance.Chemical equipment, pressure systems and demanding chloride service.
2205 DuplexStandard duplex stainless steelHigh strength and strong chloride SCC resistance.Offshore, marine, chemical, pulp-paper and pressure equipment.
2507 Super DuplexSuper duplex stainless steelVery high strength and excellent chloride corrosion resistance.Severe offshore, subsea, seawater and desalination service.
304LLow-carbon austenitic stainless steelExcellent formability, easy welding and broad availability.Food equipment, tanks, structures and general fabrication.

Selection Guidance

  • Choose 904L stainless steel when severe acid resistance and high-alloy austenitic performance are required.
  • Choose 316L when moderate chloride resistance and easy fabrication are enough.
  • Choose 317L or 317LMN when higher molybdenum austenitic performance is required but 904L may be more than necessary.
  • Choose 2205 when high strength and chloride stress corrosion cracking resistance are more important than sulfuric acid resistance.
  • Choose 2507 when severe chloride, seawater or desalination service requires super duplex performance.
  • Choose 304L when general corrosion resistance, weldability and low cost are the main priorities.

904L Stainless Steel Product Forms

Sheet, Plate, Coil and Strip

XRTGSteel supplies 904L stainless steel sheet, plate, coil and strip for chemical equipment, acid tanks, pressure vessels, heat exchangers, seawater systems and industrial fabrication. These products can be cut, slit, leveled, polished, brushed or protected with film according to the order.

Product FormAvailable OptionsTypical Use
904L Sheet / PlateHot-rolled plate, cold-rolled sheet, pickled plate, polished sheet and custom blanks.Acid tanks, pressure vessels, heat exchangers and chemical equipment.
904L CoilNo.1, 2B, BA, pickled, slit edge, mill edge and custom coil weight.Cut-to-length processing, roll forming, tanks, panels and process equipment.
904L StripNarrow strip, precision strip and custom width strip.Clamps, brackets, formed parts and corrosion-resistant components.

Pipe, Tube, Bar, Flange and Fittings

904L stainless steel pipe, tube and bar products are used for chemical process lines, refinery systems, acid piping, heat exchangers, valves, pumps, flanges, fittings and machined components. They can be supplied in standard sizes or processed into custom-cut parts.

Product FormAvailable OptionsTypical Use
904L Pipe / TubeSeamless pipe, welded pipe, heat exchanger tube, process pipe and custom cut tube.Acid piping, chemical process lines, refinery systems and heat exchangers.
904L Flat / Round BarFlat bar, round bar, forged bar, cut bar, machined bar and custom lengths.Valves, pumps, fasteners, shafts, fittings and machined corrosion-resistant parts.
904L Flange / FittingFlanges, elbows, tees, reducers, couplings, forged fittings and custom parts.Pressure piping, chemical systems, refinery units and acid handling assemblies.
904L Custom PartsLaser-cut blanks, formed parts, machined parts, welded parts and semi-finished components.Chemical equipment, acid tanks, process parts and corrosion-resistant assemblies.

Processing and Testing Support

Processing Services

XRTGSteel can process 904L stainless steel before shipment. This helps buyers save fabrication time and control production cost. Available services include cut-to-length, slitting, laser cutting, plasma cutting, waterjet cutting, bending, rolling, tube processing, machining support and export packing.

ServiceWhat We Provide
Cut-to-LengthCut coil into sheets or blanks with required length and packing quantity.
SlittingSlit coil into narrow strip for brackets, clamps and formed parts.
Surface FinishingSupply No.1, 2B, BA, pickled, ground, polished, brushed and custom industrial finishes.
Laser CuttingPrepare sheets, plates, blanks, brackets and custom high-alloy stainless parts.
Plasma / Waterjet CuttingCut thicker plate and corrosion-resistant blanks when required.
Saw CuttingCut bar, tube, pipe, forged bar and profiles to required length.
Tube ProcessingSupport welded tube forming, sizing, cutting, deburring and custom tube preparation.
Welding SupportSupport welding route review, filler metal selection, heat input guidance and post-weld cleaning consultation.
Machining SupportSupport drilling, milling, turning, grinding, sawing and semi-finished preparation.
Export PackingUse waterproof paper, PVC film, steel frame, wooden pallet, wooden case and seaworthy packing.

Inspection Support

For project orders, we can coordinate PMI, chemical analysis, tensile testing, hardness testing, intergranular corrosion testing, pitting corrosion testing, dimensional inspection, UT, surface inspection and third-party inspection. We can also supply MTC documents, packing records, heat treatment records and inspection reports.

How to Order 904L Stainless Steel from XRTGSteel

Information Needed for Quotation

A clear inquiry helps us quote faster. Please send the grade, UNS number, product form, size, quantity, surface finish and delivery destination. For 904L stainless steel, acid concentration, chloride level, temperature, welding requirement and testing requirement are especially important.

  • Grade: 904L stainless steel, UNS N08904, EN 1.4539, X1NiCrMoCu25-20-5, F904L or project-specified equivalent.
  • Product form: sheet, plate, coil, strip, seamless pipe, welded pipe, tube, flat bar, round bar, forged bar, flange, fitting or custom blank.
  • Size: thickness, width, length, diameter, wall thickness, bar size, tube size, flange rating or fitting dimension.
  • Condition: solution annealed, hot rolled, cold rolled, pickled, polished, ground, slit, cut, formed, forged or machined.
  • Surface finish: No.1, 2B, BA, pickled, ground, polished, brushed or custom industrial finish.
  • Processing: cut-to-length, slitting, laser cutting, plasma cutting, waterjet cutting, saw cutting, bending, rolling or welding support.
  • Service condition: acid type, acid concentration, chloride level, temperature, pressure, pH, cleaning method and design stress.
  • Testing requirement: MTC, PMI, tensile test, hardness test, corrosion test, UT, dimensional report or third-party inspection.
  • Quantity: sheets, pieces, kilograms, tons, coil weight, strip coils, tube bundles, pipe lengths, bar bundles, flange quantities or fitting quantities.
  • Delivery term: FOB, CFR, CIF, DDP or other agreed Incoterms.

Material Selection Support

If the best grade is not clear, send your drawing, service condition, acid concentration, chloride level, temperature, welding method and design code. Our team can compare 904L stainless steel with 316L, 317L, 317LMN, 2205, 2507 and 304L. This helps you choose a safer material before ordering.

FAQ – 904L Stainless Steel

Q1: What is 904L stainless steel?

904L stainless steel is a high-alloy austenitic stainless steel with very low carbon, high nickel, high molybdenum and copper. It is designed for strong corrosion resistance in severe acid, chloride-bearing and chemical process environments.

Q2: What is the UNS number of 904L stainless steel?

The common UNS number is N08904. Common references include Alloy 904L, EN 1.4539, X1NiCrMoCu25-20-5, F904L, 904S13 and SS 2562.

Q3: What is 904L stainless steel used for?

904L stainless steel is used for chemical processing equipment, sulfuric acid systems, phosphoric acid equipment, oil refinery units, petrochemical equipment, heat exchangers, acid tanks, seawater cooling systems, pulp and paper equipment, fertilizer plants and flue gas desulfurization systems.

Q4: Is 904L better than 316L stainless steel?

In severe acid and chloride-bearing environments, 904L is often better than 316L. It has higher nickel, molybdenum and copper content. This improves resistance to reducing acids, pitting, crevice corrosion and stress corrosion cracking. 316L is easier to source and often sufficient for moderate corrosion service.

Q5: What is the difference between 904L and 2205 stainless steel?

904L is a high-alloy austenitic stainless steel with strong acid resistance and good formability. 2205 is a duplex stainless steel with much higher strength and strong chloride stress corrosion cracking resistance. The better choice depends on acid type, chloride level, temperature, pressure and design code.

Q6: Can 904L stainless steel be welded?

Yes. 904L stainless steel has good weldability when suitable austenitic welding procedures are used. Filler metal selection, heat input, interpass temperature and post-weld cleaning should be controlled for corrosion-critical applications.

Q7: Is 904L stainless steel magnetic?

904L stainless steel is generally non-magnetic in annealed condition because it has a fully austenitic structure. Light magnetism can appear after cold working or heavy forming.

Q8: What 904L stainless steel products can XRTGSteel supply?

XRTGSteel supplies 904L stainless steel sheet, plate, coil, strip, seamless pipe, welded pipe, tube, flat bar, round bar, forged bar, flange, fitting and custom-cut products. We also provide slitting, cut-to-length, polishing, laser cutting, plasma cutting, waterjet cutting, tube forming, bending, welding support, machining support and export packing.

Request 904L Stainless Steel Price

Send your 904L stainless steel grade, UNS number, product form, size, surface finish, processing requirement, quantity and destination port. XRTGSteel will help you confirm the right supply form, standard, surface condition, tolerance, testing requirement and packing option.

For chemical processing, sulfuric acid systems, phosphoric acid equipment, oil refinery units, petrochemical plants, heat exchangers, acid tanks, seawater cooling systems, pulp and paper equipment, fertilizer plants or flue gas desulfurization systems, please also send the drawing, design code, service condition, welding requirement and inspection standard. This information helps us compare 904L with 316L, 317L, 317LMN, 2205, 2507 and 304L before quotation.

Request a Quote Online 24/7/365

Scroll to Top

Contact Us

\n