Metal Calculators & Stainless Steel Reference Tools
Free online tools for steel buyers, engineers and fabricators to check theoretical weight, coil dimensions, gauge, dimensional tolerance, PREN, surface finish, grade equivalents and purchasing calculations before preparing an RFQ.
Use each tool for preliminary specification and sourcing work, then confirm the applicable material standard, tolerances, mill certificate and purchase requirements before final acceptance.
Most Used Metal Calculators & Reference Tools
Open the dedicated tool that matches your current engineering, specification or purchasing task. Each tool has its own calculation, chart or reference guidance.
Steel Grade Equivalents Chart
Cross-reference AISI, UNS, EN, DIN, JIS, GOST and GB designations before checking chemistry, properties and MTC data.
Compare steel gradesMetal Gauge Chart
Convert stainless steel, carbon steel and aluminum gauge numbers into millimetres and inches for clearer sheet and coil RFQs.
Convert metal gaugeDimensional Tolerance Calculator
Estimate indicative thickness, width and length tolerance bands and compare measured dimensions with an allowed range.
Check dimensional toleranceSteel Coil Calculator
Estimate coil length, weight and outer diameter from thickness, width, density, inner diameter and target production quantity.
Calculate steel coil dataTon Price to Piece Price
Convert a metric-ton quotation into approximate sheet, plate, bar, pipe or tube piece cost, or compare a piece offer on a ton basis.
Convert metal pricePREN Calculator
Calculate pitting resistance equivalent number from Cr, Mo, W and N chemistry and compare stainless grades for chloride service.
Calculate PRENSurface Finish & Ra Chart
Compare No.1, 2D, 2B, BA, No.4, hairline and mirror finishes with typical Ra ranges, appearance and applications.
Compare stainless finishesMetal Weight Calculator
Estimate theoretical weight for sheet, plate, pipe, tube, bar, section and coil orders using dimensions, density and quantity.
Calculate metal weightWhich Metal Tool Should You Use?
Start with the purchasing decision you need to make rather than selecting a calculator at random.
Material & Grade Selection
Use these references when reviewing material designations, corrosion resistance or an unfamiliar grade on a drawing or MTC.
Sheet & Coil Specification
Use these tools to clarify thickness, tolerance, coil data and surface requirements before requesting production or processing.
Weight & Cost Planning
Estimate order weight, coil quantity and unit cost before comparing quotations or preparing a purchasing budget.
Use the Tools to Build a Clear Stainless Steel Inquiry
Calculators are most useful when their results become part of a complete purchasing specification.
Confirm Grade
Identify the required alloy, designation and applicable material standard.
Define Dimensions
Confirm thickness, width, length, diameter, wall thickness or coil dimensions.
Select Finish
Specify 2B, BA, No.1, No.4, HL, mirror or another required surface condition.
Estimate Quantity
Use theoretical weight, coil and pricing tools to prepare an initial order quantity.
Send the RFQ
Include grade, dimensions, finish, quantity, processing, inspection needs and destination.
Send the material grade, product form, dimensions, finish, quantity and required processing so the specification can be reviewed.
Important Notes Before Using Calculation Results
These tools are intended for preliminary engineering, sourcing and RFQ preparation. Final acceptance should follow the applicable specification, drawing, purchase order and material documentation.
Calculated weight is an estimate based on dimensions and density. Actual shipment weight can vary with production tolerance and measured dimensions.
Density varies by alloy. Use the specified grade or project density when a more precise weight calculation is required.
Gauge is not a universal thickness system across every metal. State the required millimetre or inch thickness on the final RFQ.
The applicable product standard, thickness range, dimensions and purchase agreement determine the controlling tolerance.
PREN is useful for preliminary comparison of pitting resistance, but it is not complete approval for a real corrosion environment.
Similar international designations are not automatically interchangeable. Verify chemistry, product standard, mechanical requirements and MTC data.
Popular Grades Used With These Tools
After calculating weight, PREN, tolerance or dimensions, review the dedicated material page for grade-specific composition, properties and purchasing considerations.
Stainless Steel Products & Processing
Once grade, dimensions, finish and estimated quantity are clear, continue to the relevant product or processing page before sending the final inquiry.
Stainless Steel Products
Select the required product form after confirming the basic material specification.
Stainless Steel Processing
Add the required processing method when the order needs custom dimensions, edges, surfaces or shipment preparation.
Turn Your Calculation Into a Stainless Steel RFQ
Send the required grade, standard, product form, dimensions, finish, quantity, processing requirements and delivery destination for sourcing and quotation review.
201
1.4372
X12CrMnNiN17-7-5
304
1.4301
X5CrNi18-10
304L
1.4307
X2CrNi18-9
309S
1.4833
X12CrNi23-13
310S
1.4845
X8CrNi25-21
316
1.4401
X5CrNiMo17-12-2
316L
1.4404
X2CrNiMo17-12-2
316Ti
1.4571
X6CrNiMoTi17-12-2
321
1.4541
X6CrNiTi18-10
410
1.4006
X12Cr13
420
1.4021
X20Cr13
430
1.4016
X6Cr17
2205
1.4462
X2CrNiMoN22-5-3
2507
1.4410
X2CrNiMoN25-7-4
904L
1.4539
X1NiCrMoCu25-20-5
