
Steel Coil Calculator for Weight, Length and OD
Estimate coil length from weight—or weight and outer diameter from length—using thickness, width, density and ID. Results are theoretical; confirm tolerance and mill documents before ordering. Continue to stainless steel coil supply or slitting when your numbers are ready. See stainless steel slitting and cut-to-length processing.
In metal trading, coils are often purchased by tons. However, production teams usually consume coils by meters. Therefore, this tool helps connect quotation, slitting, cut-to-length, loading and production planning.
A steel coil calculator connects thickness, width, density, weight, length and coil diameter. For example, you can estimate how many meters are in a 10-ton stainless steel coil.
However, the result is theoretical. Real coil yield can change because of thickness tolerance, crown, interwrap gaps, winding tension and edge condition.
Use this tool for RFQ planning and supplier comparison. After that, confirm final coil data with mill documents, packing details and downstream equipment limits.
Buyers often receive offers in tons. However, stamping, cutting and roll-forming plans depend on usable meters.
Outer diameter affects container loading, lifting, storage and decoiler compatibility.
Thickness, width, density and target length must align before production planning is reliable.
After coil data is clear, continue to coil supply, strip slitting, CTL and export inquiry.
Use Mode A to estimate length from thickness, width and weight. Use Mode B to estimate weight and OD from thickness, width, length and ID. In addition, use the summary box for RFQ notes.
These simplified formulas explain how the calculator works. Also, they help buyers check supplier data before ordering.
| Output | Simplified formula logic | Why buyers use it |
|---|---|---|
| Coil length | Length = Weight ÷ (Thickness × Width × Density) | Estimate usable meters from a quoted coil weight. |
| Coil weight | Weight = Thickness × Width × Length × Density | Convert production demand into purchasing tons. |
| Coil OD | OD ≈ √(ID² + 4 × Volume ÷ (π × Width)) | Check loading, storage, decoiler matching and handling feasibility. |
These examples show how coil calculation supports real purchasing and production decisions. In addition, they help turn search traffic into RFQ action.
A buyer receives a 10-ton offer for 1.0 × 1250 mm 304 coil. Then, the buyer estimates usable length before comparing project demand.
A customer has target meters for narrow strip. Therefore, the buyer converts that length into approximate coil weight.
A planner checks whether the coil OD fits loading, lifting and decoiler limits. As a result, shipment risk is reduced.
After the coil math is clear, continue to the matching product page. This helps buyers move from calculation to sourcing.
Use this page for stainless steel coil supply, grade options and export inquiry.
View stainless steel coil →Best fit when the master coil will be slit into narrow widths.
View stainless steel strip →Use this page when coil will be converted into sheets for fabrication or stock supply.
View sheet and plate →Useful when slit strip or coil is used as upstream feed for welded tube production.
View pipe and tube →Review composition, properties and applications for common 304 coil orders.
Review 304 grade →Review 316L when coil projects need better corrosion resistance than 304.
Review 316L grade →Once coil dimensions are validated, processing can reduce local handling and improve project fit. In addition, clear processing notes make quotations faster.
Use slitting when master coil width, target strip width and yield planning must align.
View slitting service →Use CTL when coil will be converted into finished sheet sizes.
View cut-to-length →Define coil finish, PVC film or decorative appearance with the coil data.
View surface finishing →Useful when coil supply continues into cut blanks or project parts.
View laser cutting →Protect coils and processed material with export-grade wrapping and loading.
View export packing →Tell us the grade, coil size, ID, target use and destination port.
Start inquiry →Send the material, thickness, width, target weight or length, required ID, finish, quantity and destination. As a result, we can move from theoretical calculation to a practical supply quote.
These answers support long-tail search terms and help buyers prepare clearer coil RFQs.
When you know the outside diameter (OD), inside diameter (ID) and width of a coil, the weight is the volume of the ring of steel multiplied by the density:
Coil weight (kg) = π ÷ 4 × (OD² − ID²) × width × density × 10⁻⁶
Here OD, ID and width are in mm and density is in g/cm³. The result assumes a tightly wound coil; loose wraps, a paper interleaf or a cardboard core make the real weight slightly lower than the theoretical value.
Worked example: a 304 stainless steel coil, 1219 mm wide, ID 508 mm and OD 1400 mm. Weight = 0.7854 × (1400² − 508²) × 1219 × 7.93 × 10⁻⁶ = about 12,921 kg.
There are two ways to calculate how many metres of strip are on a coil.
The weight-based formula is usually more reliable for purchasing because the net weight is printed on the coil label and the mill test certificate, while OD is measured roughly.
To check whether a coil will fit a decoiler, a slitting line or a container door, rearrange the weight formula:
OD (mm) = √(ID² + 4 × weight ÷ (π × width × density × 10⁻⁶))
Example: an 8,000 kg 304 coil, 1250 mm wide, on a 508 mm ID has an OD of about 1,134 mm.
| Material | Density (g/cm³) | Weight per m² per 1 mm thickness (kg) |
|---|---|---|
| Carbon steel / cold-rolled / galvanized base steel | 7.85 | 7.85 |
| 304 / 304L stainless steel | 7.93 | 7.93 |
| 316 / 316L stainless steel | 7.98 | 7.98 |
| 430 ferritic stainless steel | 7.70 | 7.70 |
| 201 stainless steel | 7.80 | 7.80 |
| Aluminum (1xxx–5xxx series, typical) | 2.70 | 2.70 |
| Copper | 8.96 | 8.96 |
For coated products such as galvanized coil, add the coating mass from the coating designation (for example, a Z275 coating is 275 g/m² total on both sides) if you need an exact weight.
Coil processors often specify a maximum coil weight per unit of width: kg per mm of width, or PIW (pounds per inch of width) in North America. Calculate it by dividing the coil weight by its width. The example coil above is about 10.6 kg/mm (594 PIW). An 8,000 kg coil that is 1250 mm wide is 6.4 kg/mm. Check this value against the limits of your decoiler, slitter or press line before you confirm the order.
Example: if each coil has a gross weight of 6,500 kg, divide the container's usable payload by 6,500 and round down. That gives the most coils the container can take by weight. Then confirm that the layout and the lashing points allow that number.
Use weight = π ÷ 4 × (OD² − ID²) × width × density if you know the diameters, or weight = thickness × width × length × density if you know the length. Keep all dimensions in the same unit system.
Cold-rolled carbon and stainless coils are most often wound on a 508 mm (20 in) or 610 mm (24 in) ID. Hot-rolled coils commonly use 762 mm (30 in). Narrow slit coils may use smaller IDs, such as 300, 400 or 508 mm, depending on the customer's decoiler.
Yes. Divide the net coil weight by thickness × width × density. This method is usually more accurate than measuring the OD.
1.4372
X12CrMnNiN17-7-5
1.4301
X5CrNi18-10
1.4307
X2CrNi18-9
1.4833
X12CrNi23-13
1.4845
X8CrNi25-21
1.4401
X5CrNiMo17-12-2
1.4404
X2CrNiMo17-12-2
1.4571
X6CrNiMoTi17-12-2
1.4541
X6CrNiTi18-10
1.4006
X12Cr13
1.4021
X20Cr13
1.4016
X6Cr17
1.4462
X2CrNiMoN22-5-3
1.4410
X2CrNiMoN25-7-4
1.4539
X1NiCrMoCu25-20-5